632161
15
Zoom out
Zoom in
Previous page
1/84
Next page
English - 4
EURO • Printed in England • BA F 016 L69 797 • ARM 320 • GB • OSW 11/00
F016 L69 797 • 11.00
To aid starting push handle down to lift front
wheels.
Starting:
Press and hold the safety button 2.
Squeeze the switch lever 1 towards the han-
dle.
Release the safety button 2.
Stopping:
Release the switch lever 1.
Place the lawnmower on the edge of the lawn, as
close to the power point as possible. Work away
from the power point as in figure F. Then at right an-
gles.
Position the cable to opposite side (already cut) at
the end of each turn.
When mowing do not allow the motor to la-
bour particularly in heavy conditions.
When the motor labours the speed of the mo-
tor drops and you will hear a change in the mo-
tor sound, when this occurs stop mowing, re-
lease switch lever and raise the height of
cut. Failure to do so could damage the ma-
chine.
Stop, remove plug from the power supply
and remove the grassbox.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose,
dislodged or damaged blades, loose fixings, and
worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the mower should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer service agent
for Bosch garden products.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number from the
nameplate of the machine!
Stop, remove plug from the power supply
and remove the grassbox.
Turn the machine on its right side and inspect the
blade and fan; if blunt or damaged, replace.
Use the following procedure to remove and replace
the blade.
Hold the blade 14 using gardening gloves (not pro-
vided) use a spanner (not provided) to remove the
blade nut 13 and blade.
Before fitting the new blade, ensure that the fan 15 is
fitted correctly on the shaft. It will fit in only one posi-
tion.
Fit the blade and the blade nut. Ensure that the blade
is the correct way up (so that this symbol can be
seen located as in figure G) and tighten the nut
firmly.
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the ventilation slots 9.
Turn the machine on its right side and clean the
blade area. If grass cuttings are compacted in the
blade area, remove with a wooden or plastic imple-
men.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage loosen the wing nuts 12 and fold the
handles.
Ensure cables are not trapped when folding/
unfolding top handles, do not drop the han-
dles.
Starting and Stopping (Figure D)
Mowing
Maintenance
0
I
2
1
Blade Maintenance (Figure G)
After Mowing/Storage
F 016 L69 797.book Seite 4 Dienstag, 21. November 2000 7:52 07
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch ARM 320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ARM 320 in the language / languages: All languages as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info