78579
20
Zoom out
Zoom in
Previous page
1/119
Next page
20 | English
F016 L70 529 | (7.2.08) Bosch Power Tools
Operation
Starting and Stopping
Starting
Connect the product to the mains supply ensur-
ing that the mains switch is in the off position.
Open water tap.
Press the safety lock 4 to release the trigger 3.
Fully press the trigger 3 until there is a constant
flow of water to clear the air from the machine
and water supply hose. Release trigger 3. Press
the trigger safety lock 4.
Press button „I“ on main switch 5.
Point the power gun 2 downwards. Press the
trigger safety lock 4 to release the trigger 3. Ful-
ly press the trigger 3.
Autostop function
The machine is designed to switch off the motor
when the trigger 3 is released on the gun. This
feature relieves high pressure from the system
to achieve a longer lifetime and lower energy
consumption.
Stopping
Release trigger 3. Press the trigger safety lock.
The power gun is now locked and can not be op-
erated accidentally.
Press button „O“ on the main switch 5.
Close water tap. Unplug the machine from the
electric supply.
Press the trigger safety lock 4 to release the trig-
ger 3. Fully press the trigger 3 until there is no
more water pressure in the machine. Release
trigger 3. Press the trigger safety lock 4.
Disconnect water supply hose from machine
and water supply.
Self priming function
The machine is designed to also operate with
water from sources other than a water tap, e . g.
ponds and water butts due to the self priming
function. The use of an additional water filter
(not supplied) is recommended for this kind of
use.
Make sure that water source is situated no more
than 1 meter below the level of the machine.
Fill water supply hose (not supplied) with water
before connecting it to the machine.
Run machine without lance attached until there
is a constant flow of water.
Turn off machine and connect lance.
Working Advice
General
Ensure that the machine is on level ground.
Do not kink or drive a motor vehicle over the
high pressure hose. Do not expose the high
pressure hose to sharp edges or corners.
Never use the roto nozzle to clean motor vehi-
cles.
Working advice for cleaning with detergents
Detergents can be applied using the detergent
bottle/foam lance.
Read the detergent label for additional instruc-
tions.
Always wet the object first.
Apply detergent to the object from the bottom
up.
Give the detergent time to work, but never leave
it to dry.
Rinse from top and work downwards.
K
OBJ_BUCH-683-001.book Page 20 Thursday, February 7, 2008 4:29 PM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Aquatak Go Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Aquatak Go Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Aquatak Go Plus

Bosch Aquatak Go Plus User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info