Manual Bosch Aquatak Go Plus (page 19 of 119) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78579

Zoom out

Zoom in

1/119

English | 19

Bosch Power Tools F016 L70 529 | (7.2.08)

Your machine is double insulated for safety and

requires no earth connection. The operating

voltage is 230 V AC, 50 Hz (for non-EU countries

220 V, 240 V as applicable). Only use approved

extension cables. Contact your Bosch Service

Centre for details.

If you want to use an extension cable when op-

erating your high pressure washer, only the fol-

lowing cable dimensions should be used:

- 1,5 mm

– max length 20 m

- 2,5 mm

– max length 50 m

Note: If an extension cable is used it must be

earthed and connected through the plug to the

earth cable of your supply network in accord-

ance with prescribed safety regulations.

If in doubt contact a qualified electrician or the

nearest Bosch Service Centre

WARNING! Inadequate extension cables can be

dangerous. Extension cable, plug and socket

must be of watertight construction and intend-

ed for outdoor use.

Cable connections should be kept dry and off

ground.

It is recommended for increased electrical safe-

ty to use a Residual Current Device (RCD) with

a tripping current of not more than 30 mA. Al-

ways check your RCD every time you use it.

If the supply cord is damaged, it must be re-

placed by a Bosch Service Centre.

Products sold in GB only: Your product is fitted

with an approved 13 A (BS 1363/A) electric plug

and is protected by a 13 A fuse (ASTA Approved

to BS 1362).

If the fitted plug is not suitable for your socket

outlets, it should be cut off and an appropriate

plug fitted in its place.

The severed plug must be disposed of to avoid a

possible shock hazard and should never be in-

serted into a 13 A socket elsewhere.

Assembly

Connect pressure washer to trolley

Push the four supplied wheels onto the trolley.

Fit the pressure washer to the trolley as shown,

to remove lift the clip 11.

Assembly of roto-nozzle and tube

Insert the roto-nozzle 7 into the tube 8 .

Connecting high pressure water

supply hose/nozzle

Insert the jet fan power lance 1 into power gun

2. Depress and turn the jet fan power lance 90°

clockwise to lock in place.

Securely screw high pressure hose 6 onto ma-

chine at connection 17.

Connecting high pressure to gun

Join high pressure hose to gun as shown.

Secure with clip 15 as shown, check if secure by

pulling on high pressure hose.

Water connection

Screw inlet connector 12 onto machine water

inlet connection 16.

Attach water supply hose (not supplied) to the

mains water supply and machine.

Using different nozzles

Roto power lance (depending on model)

Turn the jet-fan power lance 1 90° anti-clock-

wise. Extract the jet-fan power lance.

Insert the roto-power assembly into the power

gun 2. Depress and turn the roto-power lance

90° clockwise to lock in place.

Detergent nozzle and bottle

Turn the jet-fan power lance 1 90° anti-clock-

wise. Extract the jet-fan power lance.

Insert the detergent-bottle 10 into the power

gun 2. Depress and turn the detergent-nozzle

90° clockwise to lock in place.

OBJ_BUCH-683-001.book Page 19 Thursday, February 7, 2008 4:29 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Aquatak Go Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Aquatak Go Plus

Bosch Aquatak Go Plus User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 119 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Aquatak Go Plus Manual

Product: