382378
23
Zoom out
Zoom in
Previous page
1/130
Next page
English | 23
Bosch Power Tools F 016 L70 546 | (13.1.11)
Maintenance and Service
Maintenance
f Stop, remove plug from the power supply
and disconnect from water supply.
Note: To ensure long and reliable service, carry
out the following maintenance regularly.
Regularly check for obvious defects such as
loose fixings, and worn or damaged compo-
nents.
Check that covers and guards are undamaged
and correctly fitted. Carry out necessary mainte-
nance or repairs before using.
If the machine should happen to fail despite the
care taken in manufacture and testing, repair
should be carried out by an authorised custom-
er service agent for Bosch garden products.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the machine.
Fuses blow Fuses incorrectly rated Change to a mains supply high-
er than the pressure washer
amp consumption
Excessive working pressure Nozzle partly blocked Clean nozzle (see figure L)
Pressure pulsating Air in the inlet water supply
hose/pump
Allow pressure washer to run
with open spray handle and
nozzle at low pressure until reg-
ular working pressure is ob-
tained
Inadequate water supply Check that the water supply
corresponds to specifications.
The minimum specification for
the water supply hose is 1/2" or
13 mm diameter
Water strainer blocked Clean water strainer
Water supply hoses squeezed Straighten out kinked water
supply hoses
Pressure too low, but steady Nozzle worn Change the nozzle
Start/stop valve worn Activate trigger five times in
quick succession
Motor starts up but no working
pressure
No water supply Connect water supply
Water strainer clogged up Clean the water strainer
The pressure washer starts ir-
regularly by itself
Pump/power gun leaky Contact your Bosch Service
Centre
Water leaks from machine Leaking pump 6 drops per minute are permis-
sible. In case of more serious
leakage, you should contact
your Bosch Service Centre
Problem Possible Cause Corrective Action
OBJ_BUCH-764-002.book Page 23 Thursday, January 13, 2011 3:33 PM
23


Need help? Post your question in this forum.

Forumrules
1

Forum

bosch-aquatak-clic-135

Reset search

  • The supply cable on my Aquatec Click 135 will not rewind.
    How can I fix this Submitted on 17-4-2017 at 18:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch aquatak clic 135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch aquatak clic 135 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info