Manual Bosch aquatak clic 135 (page 22 of 130) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

382378

Zoom out

Zoom in

1/130

22 | English

F 016 L70 546 | (13.1.11) Bosch Power Tools

Autostop function

The machine is designed to switch off the motor

when the trigger 9 is released on the gun. This

feature relieves high pressure from the system

to achieve a longer lifetime and lower energy

consumption. (A short squeaking noise can oc-

cur and is completely normal.)

Stopping

Release trigger 9. Press the trigger safety lock

10. The power gun is now locked and can not be

operated accidentally.

Press on/off switch 4.

Close water tap. Unplug the machine from the

mains supply.

Press the trigger safety lock 10 to release the

trigger 9. Fully press the trigger 9 until there is

no more water pressure in the machine. Release

trigger 9. Press the trigger safety lock 10.

Disconnect water supply hose from machine

and water supply.

Self priming function

The machine can also operate with water from

sources other than a water tap, e. g. ponds and

water butts due to the self priming function. The

use of an additional water filter (not supplied)

is highly recommended for this kind of use.

Make sure the water source is situated no more

than 1 m below the level of the machine.

Fill water supply hose (not supplied) with water

before connecting it to the machine. Running

the machine without water (running dry) will

damage it.

Run machine without lance attached until there

is a constant flow of water.

Turn off machine and connect lance.

Working Advice

General

Ensure that the pressure washer is on level

ground.

Do not kink or drive a motor vehicle over the

high pressure hose. Do not expose the high

pressure hose to sharp edges or corners.

Never use the roto jet mode to clean motor vehi-

cles.

Troubleshooting

The following chart lists problem symptoms, possible causes and corrective action, if your pressure

washer does not operate properly. If these do not identify and correct the problem, contact your

service agent.

f Warning: Switch off and remove plug from mains before investigating fault.

Problem Possible Cause Corrective Action

Motor refuses to start Plug not connected Connect plug

Mains socket faulty Use another socket

Fuse faulty/blown Replace fuse

Extension cable damaged Try without extension cable

Motor stops Fuse faulty/blown Replace fuse

Wrong mains voltage Check that mains voltage corre-

sponds to specifications on the

model tag

OBJ_BUCH-764-002.book Page 22 Thursday, January 13, 2011 3:33 PM

The supply cable on my Aquatec Click 135 will not rewind.
How can I fix this Submitted on 17-4-2017 at 18:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch aquatak clic 135 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch aquatak clic 135 Manual

Product: