697454
106
Zoom out
Zoom in
Previous page
1/170
Next page
106 en | Configuration AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
Remote arming / disarming of each area
Enabling / disabling the alarm siren of each area
Enabling / disabling each output
Maintenance
Domestic testing
Communication testing
Downloading voice files
Viewing history events
A-Link Plus sensitive data protection
A-Link Plus has an export/import data function to export and import configuration data files.
!
Caution!
Sensitive data protection
Make sure that all exported configuration data files are handled with care and that no copies
are made. While working with A-Link Plus, make sure that your computer is supervised or
secured at all times. Give the exported configuration data files directly only to authorized
persons. Make the authorized persons aware of the sensitivity of the exported configuration
data files.
7.3.1 Prerequisites for connecting to A-Link Plus
Notice!
This manual describes how to connect to A-Link Plus. Programming the AMAX panel via A-Link
Plus is described in the A-Link Plus for AMAX Online Help.
Notice!
This manual describes the configuration with the A-Link Plus software in connection with the
firmware version V 1.5 or higher. If you are using an older firmware version, refer to your local
Bosch contact.
How to open A-Link Plus
1. Install A-Link Plus on your PC.
2. Open A-Link Plus.
The default values for both Operator and Password are “ADMIN”.
How to prepare a connection
1. Select Customer –> New Customer.
The Customer Information tab opens.
2. Under Customer Number, enter a number.
3. Select the Control Panel Configuration tab.
4. Under Control Panel Series, select AMAX.
5. Under Model, select your panel model.
6. Only for AMAX panels V1.4 and lower: Select Communication and Report manager –>
Receiver setting.
7. Only for AMAX panels V1.4 and lower: In the column Receiver 1 and the line Subscriber
Number, enter the value that is currently programmed in your AMAX panel as receiver 1.
8. Select Communication and Report manager –> Remote Access -> Automation Pass
code.
9. Enter the value that is currently programmed in your AMAX panel as RPS access code.
10. Select Code manager -> Installer code.
11. Enter the value that is currently programmed in your AMAX panel as installer code.
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info