697454
104
Zoom out
Zoom in
Previous page
1/170
Next page
104 en | Configuration AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
2
EN=1
RF DEVICES / USER
RF REPEATER
SIREN BEEP ARM/DIS
1-4h
0-disable 1-enable
6-24h
0-no alarm
RF SUPERVISION
2-1h
00 - 15 00 = disable, 01 = most sensitive
5-12h
1
EN=0
2
4
12
RF KEYFOB PANIC AL
2-audible alarm
0-disabled
0-disable 1-enable
1
CLEAR CONFIRM
CLEAR CANCEL
REPEATERID: MANUAL
RF REPEATER DIAGN.
RF ZONE No:
RF SENSOR DIAGNOSE
1-silent alarm
press* 3s for MANUAL. Trigger device, RFID will be entered
CLR ALL RF DEVICES
REPEATER No: 1-8
2-24h
RF LOW BATT REPEAT
4-4h
3-2,5h
1-20min
REPEATER No: 1-8
press* 3s for AUTO. 9 Digits
REPEATER ID: AUTO
RF ZN MISSING = AL
RF JAM DETECT LEV.
0-disable
RF RECEIVER
0-disable 1-enable
0
7 RF MANAGER
RF SETTINGS
Default
Menu Items
Parameters / Description
Certification
Figure7.10: RF Manager
Default
Certification
For Addresses, refer to Installation Guide
Parameters / Description
8 ADDR./KEY PROGR.
Menu Items
copy data from Panel to blue programming key
COPY DATA TO PANEL
COPY DATA TO KEY
ADDRESS PROGRAM
copy data from blue programming key to Panel
Figure7.11: Address and Key Programming
7.2.2 LED/LCD keypad programming
An LED/LCD keypad can be used to program the system but only works with address
programming (please refer to Address programming, page 109) as the programming menu can
not be displayed on the LED/LCD keypad. Therefore, it is recommended to use a text keypad
or the PC software A-Link Plus for programming the system.
Accessing the programming menu
1. Confirm that the system is disarmed and that no alarm occurred.
2. Enter the installer code. The default setting for the installer code is 1234.
3. Enter [958] + press [#].
P The STAY and AWAY indicators flash to indicate the programming mode.
Navigation
Programming an option
1. Enter the required address and press [#].
2. Enter the desired data value and press [*] to confirm.
3. Press [#] to proceed to the next address or press [*] to get back to the previous address.
4. Repeat step 1 if you want to program multiple options.
Exiting the Programming Mode
It is optional to save or not to save the programming data.
1. Enter [960] and press [#] to save the data and to exit the programming mode.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info