697454
77
Zoom out
Zoom in
Previous page
1/170
Next page
AMAX panel Settings | en 77
Bosch Security Systems B.V. Installation Manual 2019.08 | 11 | F.01U.309.277
6.4.5 Keypad lockout
Follow EN standard
This option defines whether the EN standard concerning keypad lockout is followed or not. If
this option is enabled, the EN standard concerning keypad lockout is followed. That means
that when it is possible to attempt access more than 3 times in a period of 60 seconds, then
the number of successive failure attempts is limited to 3. The keypad will then be locked for 5
minutes.
If this option is enabled, the option “keypad lock count” cannot be configured anymore.
Keypad lock count
The number of attempts to enter a wrong user code can be set from 1 to 15 in order to
supervise valid user access. The keypad will be locked for 3 minutes, when the number of
attempts reaches the declared value.
This option is only available if the option “Follow EN Standard” is disabled.
6.5 System
6.5.1 System setting
This chapter describes the system settings that can be accessed via the SYSTEM SETTINGS 1
and the SYSTEM SETTINGS 2 menu and their submenus if available.
Date and time
Change date and time
The AMAX panel has a 24-hour clock and a 12-month calendar that need to be set after power
up. The order is day, month, year, hour, and minute, with each item occupying two digits [DD]
[MM] [YY] [HH] [MM].
DST options
The daylight saving time setting determines when daylight saving time will start and end.
Therefore, date and time has to be set correctly.
Predefined daylight saving time settings are available for four regions. Alternatively, a daylight
saving time setting can be configured individually.
Daylight saving time starts and ends according to the daylight saving time settings of a certain
region. Individually configured daylight saving time starts and ends at 1 a.m.
The daylight saving time settings are the following:
1 - Euro Europe, Azerbaijan, Turkey, Lebanon, Cyprus
2 - Brazil Southern region of Brazil
3 - Mexico Southern region of Mexico
4 - US nor Mexico USA, Canada, northern region of Mexico
5 - Customize Can be customized individually
Fault configuration
Fault sound reminder
When the command [2] [1] on the keypad is used for fault inquiry, the keypad can be
programmed to sound prompt tone to indicate new system fault. The system is defaulted to
enable. In case of a new fault, all keypads will sound a short beep once a minute.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AMAX panel 4000 EN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AMAX panel 4000 EN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Quick start guide - German - 76 pages

Bosch AMAX panel 4000 EN Quick start guide - Dutch - 76 pages

Bosch AMAX panel 4000 EN Installation Guide - Dutch - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info