634125
14
Zoom out
Zoom in
Previous page
1/77
Next page
EURO • Printed in England • BA F 016 L69 849 • ALM 28/30 • GB • OSW 10/01
English - 4
For all correspondence and spare parts orders, al-
ways include the 10-digit part number from the
nameplate of the machine!
Stop and remove plug from the power sup-
ply.
Place the handle in the vertical position.Turn the ma-
chine on its right side and inspect the cutter: If blunt
or damaged, fit a new blade as follows:
To remove the worn cutter 12 push along its length,
in direction of the arrow, as in figure G until it snaps
off the pivot 14.
Clean the pivot 14 of any residual plastic/debris with
a sharp knife.
To refit the new cutter 12 place the eyelet over the
pivot 14 and pull outwards until it snaps into place.
Replace blades ALM 28 (white) F016 800 008
Replace blades ALM 30 (yellow) F016 800 107
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the air filter as in figure H.
Turn the machine on its side and clean the blade
area. If grass cuttings are compacted in the blade
area, remove with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage loosen the wing nuts 7 and fold the
handles. If necessary hang as shown in figure C.
Ensure cables are not trapped when folding/
unfolding top handles, do not drop the han-
dles.
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Blade Maintenance
Accessories
After Mowing/Storage
Fault Finding
Symptom Possible Cause Remedy
Machine fails to operate Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Mower in long grass
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Increase height of cut and tilt mower
Machine functions
intermittently
Extension cable damaged
Machines internal wiring damaged
Inspect cable, replace if damaged
Contact Service Agent
Machine leaves ragged
finish
or
motor labours
Height of cut too low
Cutter blunt
Underside of machine badly clogged
Increase height of cut
(see “Height of Cut Adjustment”)
Replace cutter
(see “Blade Maintenance”)
Clean machine
(see “After Mowing/Storage”)
Poor hovering Blocked air filter
Underside of machine badly clogged
Clean air filter (see “After Mowing/
Storage”)
Clean machine
(see “After Mowing/Storage”)
Machine vibrates Fan not locked in place
Cutter stick worn or damaged
Lock cutting disc
Replace cutting stick
ALM 28/30.book Seite 4 Freitag, 19. Oktober 2001 9:05 09
14 • F 016 L69 849 • TMS • 16.10.01
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch ALM 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ALM 30 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info