Manual Bosch ALM 30 (page 13 of 77) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

634125

Zoom out

Zoom in

1/77

EURO • Printed in England • BA F 016 L69 849 • ALM 28/30 • GB • OSW 10/01

English - 3

➊ Position the handle bottom 6 at the rear of the

motor cover.

➋ Line up the holes and secure with the pivot

pins 9 provided.

➌ Attach the handle top 3 with the bolts and wing

nuts 7 to the handle bottom 6.

Note: Ensure that the cable clips 8 supplied are

used to fix the cable to the handle.

Attach cable to cable restraint 5 ensuring that

sufficient cable slack is available.

The handle can be set in three positions, as in

figure C:

I Park position

II Handle location for mowing

III Handle location to enable mower to be hung on

walls.

To move the handle from location I or III to mowing

location II press together the tubes of the handle

bottom 6.

Stop, release switch lever, wait until the

motor stops and remove the plug before

adjusting height. The blades continue to

rotate after the machine is switched off, a

rotating blade can cause injury.

For the first cutting of the season, a high cutting ad-

justment should be selected.

Your machine has two settings which give the fol-

lowing approximate height of cuts:

low = 20 mm high = 30 mm

To change the height of cut, place the handle in the

park position and turn the mower on its side and hold

onto the fan 13 (figure D):

➊ Turn the cutting disc 11 relative to the

fan 13 to unlock the cutting disc.

➋ Push/pull the cutting disc 11 on low or

high cutting position.

➌ Turn the cutting disc 11 relative to the

fan 13 to lock the cutting disc.

The blade continues to rotate for a few

seconds after the machine is switched off.

Allow the motor/blade to stop rotating be-

fore switching “on” again.

Do not rapidly switch off and on.

To aid starting tilt mower to side.

Starting:

Press and hold the safety button 2.

(Figure E)

Squeeze the switch lever 1 towards the han-

dle.

Release the safety button 2.

Stopping:

Release the switch lever 1.

The motor cover is designed with a flexible mounting

and tilts to improve directional control.

Place the lawnmower on the edge of the lawn, as

close to the power point as possible. Work away

from the power point as in figure F. Then at right an-

gles.

Position the cable to opposite side (already cut) at

the end of each turn.

When mowing do not allow the motor to la-

bour particularly in heavy conditions.

When the motor labours the speed of the mo-

tor drops and you will hear a change in the

motor sound, when this occurs stop mowing,

release switch lever and raise the height of

cut. Failure to do so could damage the ma-

chine.

Stop and remove plug from the power sup-

ply.

Note: To ensure long and reliable service, carry out

the following maintenance regularly.

Regularly check for obvious defects such as a loose,

dislodged or damaged blade, loose fixings, and

worn or damaged components.

Check that covers and guards are undamaged and

correctly fitted. Carry out necessary maintenance or

repairs before using.

If the mower should happen to fail despite the care

taken in manufacture and testing, repair should be

carried out by an authorised customer service agent

for Bosch garden products.

Assembly

Handle Adjustment

Adjusting the Cutting Height

Starting and Stopping

Mowing

Maintenance

ALM 28/30.book Seite 3 Freitag, 19. Oktober 2001 9:05 09

13 • F 016 L69 849 • TMS • 16.10.01

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch ALM 30 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch ALM 30 Manual

Product: