Manual Bosch AKE 40-19S (page 25 of 153) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

105962

Zoom out

Zoom in

1/153

English - 25

25 • F016 L70 506 • TMS • 19.10.07

For SDS models only, reverse the chain tensioning

catch 16 by removing the screws and refitting it on

the opposited side.

Check drive sprocket 21. If it is worn out or damaged

due to strain, have it exchanged by an authorized

Bosch service agent.

Have your chain sharpened professionally at your

Bosch approved service agent or sharpen the chain

yourself using the Bosch sharpening kit or a Dremel

power tool with the appropriate grinder (1453), both

available at your Bosch approved service agent. Fol-

low the sharpening instructions supplied with the

sharpening kit.

Proper functioning of the automatic oiler can be

checked by running the chain saw and pointing the

tip of the chain bar towards a piece of cardboard or

paper on the ground. Caution: Do not touch the

ground with the chain. Ensure safety clearance of

20 cm. If an increasing oil pattern developes, the au-

tomatic oiler is operating fine. If there is no oil pat-

tern, despite a full oil reservoir, see “Fault Finding” or

contact your Bosch approved service agent.

Chain and Chain bar

AKE 30-19 S..................................... F 016 800 259

AKE 35-19 S..................................... F 016 800 260

AKE 40-19 S..................................... F 016 800 261

Chain

AKE 30-19 S..................................... F 016 800 256

AKE 35-19 S..................................... F 016 800 257

AKE 40-19 S..................................... F 016 800 258

Cleaning

Chain sharpening/cleaning kit.......... F 016 800 262

Chain oil 1 litre...................................2 607 000 181

Additional accessories

Gloves ...............................................2 607 000 134

Protective goggles............................ F 016 800 178

SNR 19 ear protectors

(sounding proofing level 19 dB (A))...2 607 990 042

SNR 24 ear protectors

(sounding proofing level 24 dB (A))...2 607 990 043

Clean the moulded plastic housing of the chain saw

using a soft brush and clean cloth. Do not use water,

solvents or polishes. Remove all debris, especially

from the motor cooling vents 27.

Remove and brush clean the cover plate 15, chain

and chain bar after 1 to 3 hours of use.

Clean the area under the cover plate 15, the drive

sprocket 21 and chain bar assembly using a soft

brush. Clean oil outlet 19 with a clean cloth.

If the chain tensioning mechanism becomes dif-

ficult to operate, dismantle the protective lid 29 from

inside the cover plate 15. Turn locking knob 14 and

red tensioning ring 13 against each other, so that de-

bris is loosened from the mechanism and can be dis-

carded. Carefully knock out debris. If mechanism is

heavily clogged, use a soft brush or compressed air

for cleaning. Do not use tools of any kind.

If the chain saw is to be stored for a longer period of

time, clean chain and chain bar.

Store in a secure, dry place out of the reach of chil-

dren. Do not place other objects on the chain saw.

To prevent leakage ensure machine is left in a hori-

zontal position (oil filler cap 4 uppermost).

When storing machine in original packaging the oil

tank have to be completely emptied.

Sharpening Chain

Checking the Automatic Oiler

Accessories

Cleaning/Storage

F016 L70 506 - GB Seite 25 Dienstag, 23. Oktober 2007 3:20 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 40-19S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AKE 40-19S

Bosch AKE 40-19S User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 153 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AKE 40-19S Manual

Product: