1151
18
Zoom out
Zoom in
Previous page
1/139
Next page
English - 3
18 • F016 L70 362 • TMS • 25.04.06
The chain saw is intended for sawing of trees, tree
trunks, branches, wooden beams, planks, etc. Cuts
can be sawed with or across the grain. This product
is not suitable for sawing mineral materials.
This manual gives instructions on the correct as-
sembly and safe use of your chain saw. It is impor-
tant that you read these instructions carefully.
Carefully remove the machine from its packaging
and check for complete contents:
Chain saw
Cover plate
Chain
Chain bar
Chain guard
Chain oil (80 ml)
Operating instructions
Adjusting Tool
When parts are missing or damaged, please contact your
dealer.
1 Rear handle
2 On/Off switch
3 Lock-off button
4 Oil filler cap
5 Activation lever for kickback brake
(hand guard)
6 Front handle
7 Nose sprocket (only AKE 35/40)
8 Chain guard
9 Chain
10 Chain bar
11 Gripping teeth
12 Cover plate
13 Adjusting tool
14 Locking nut
15 Fastening bolt
16 Chain tensioning peg
17 Chain tensioning screw
18 Guide fins for chain bar
19 Oil outlet
20 Symbol for rotation and cutting direction
21 Drive sprocket
22 Chain catch bolt
23 Mains plug**
24 Serial Number
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
Product Specification
Chain saw AKE 30 AKE 35 AKE 40
Part number (typ) 3 600 H34 0.. 3 600 H34 0.. 3 600 H34 0..
Rated power [W] 1600 1600 1600
Chain speed (no load) [m/s] 9 9 9
Chain bar length [cm] 30 35 40
Nose sprocket
Kickback Brake
Chain type 3/8" - 90 3/8" - 90 3/8" - 90
Drive link thickness [mm] 1.1 (0.043") 1.1 (0.043") 1.1 (0.043")
Amount of drive links 45 52 57
Oil reservoir capacity [ml] 200 200 200
Automatic oiler
Metal gripping teeth
Weight without mains cable. approx. ** [kg] 3.9 4.0 4.1
Protection class / II / II / II
**measured with chain bar and chain
Note: Please observe the order number of your machine. The trade names of individual machines can vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
Intended Use
Introduction
Delivered Items
Operating Controls
A
F016 L70 362 - GB Seite 3 Freitag, 28. April 2006 10:08 10
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AKE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 35 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch AKE 35

Bosch AKE 35 User Manual - Dutch - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info