79292
21
Zoom out
Zoom in
Previous page
1/153
Next page
English - 4
Carefully remove the machine from its packaging
and check for complete contents:
Chain saw
Cover plate
Chain
Chain bar
Chain guard
Operating instructions
When parts are missing or damaged, please contact your
dealer.
1 Rear handle
2 On/Off switch
3 Safety lock
4 Oil filler cap
5 Activation lever for kickback brake (hand
guard)
6 Front handle
7 Nose sprocket (AKE 35/40 S only)
8 Chain guard
9 Chain
10 Chain bar
11 Gripping teeth
12 Locking knob
13 Cover plate
14 Chain tensioning knob
15 Fastening bolt
16 Chain tensioning peg
17 Guide fins for chain bar
18 Oil outlet
19 Symbol for rotation and cutting direction
20 Drive sprocket
21 Chain catch bolt
22 Mains plug**
23 Serial Number
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 V AC, 50 Hz (for non-EU countries 220 V,
240 V as applicable). Only use approved extension
cables. Extension cords/leads should only be used
if they comply with H07-F types or IEC
(60227 IEC 53).
If you want to use an extension cable when operat-
ing your product, only the following cable dimen-
sions should be used:
1.0 mm
2
: max length 40 m
1.5 mm
2
: max length 60 m
2.5 mm
2
: max length 100 m
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
For products not sold in GB:
WARNING: For safety, it is essential that the mains
plug 22 attached to the machine is fitted to the
power supply cable 24 as shown.
The couplings of connection leads must be pro-
tected against splashes and the coupling sockets on
the leads must be made of rubber or coated with
rubber.
Fixing means for the connection leads must be
used.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used if
in perfect condition.
If the supply cord is damaged, it must be replaced by
a Bosch Service Centre.
Products sold in GB only: Your chain saw is fitted
with an approved 13 A (BS 1363/A) electric plug and
is protected by a 13 A fuse (ASTA Approved to
BS 1362).
If the fitted plug is not suitable for your socket out-
lets, it should be cut off and an appropriate plug fit-
ted in its place by an authorized customer service
agent.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a 13 A socket elsewhere.
Delivered Items
Operating Controls
For Your Safety
Warning! Switch off, remove plug from mains
before adjusting cleaning or if the cable is cut,
damaged or entangled.
Caution! Do not touch rotating chain.
Do not operate chain saw near other people,
children or animals. Do not operate chain saw
after drinking alcohol or under the influence of
intoxicating drugs or medication.
F 016 L70 540.book Seite 4 Montag, 9. Februar 2009 2:37 14
21 • F 016 L70 540 • TMS • 29.01.09
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AKE 35 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 35 S in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info