Manual Bosch AKE 35 S (page 20 of 153) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79292

Zoom out

Zoom in

1/153

English - 3

20 • F 016 L70 540• TMS • 29.01.09

■ Cut wood only. Don’t use chain saw for pur-

poses not intended – for example – Don’t use

chain saw for cutting plastic, masonry or non-

wood building materials. Use of the chain saw

for operations different then intended could result

in a hazardous situation.

Causes and Operator Prevention of Kickback:

– Kickback may occur when the nose or tip of the

guide bar touches an object, or when the wood

closes in and pinches the saw chain in the cut.

– Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and

back towards the operator.

– Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back towards

the operator.

– Either of these reactions may cause you to lose

control of the saw which could result in serious

personal injury. Do not rely exclusively upon the

safety devices built into your saw. As a chain saw

user, you should take several steps to keep your

cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect

operating procedures or conditions and can be

avoided by taking proper precautions as given be-

low:

■ Maintain a firm grip, with thumbs and fingers

encircling the chain saw handles, with both

hands on the saw and position your body and

arm to allow you to resist kickback forces.

Kickback forces can be controlled by the opera-

tor, if proper precautions are taken. Do not let go

of the chain saw.

■ Do not over reach and do not cut above shoul-

der height. This helps prevent unintended tip

contact and enables better control of the chain

saw in unexpected situations.

■ Only use replacement bars and chains speci-

fied by the manufacturer. Incorrect replacement

bars and chains may cause chain breakage and/

or kickback.

■ Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to in-

The chain saw is intended for sawing of trees, tree

trunks, branches, wooden beams, planks, etc. Cuts

can be sawed with or across the grain. This product

is not suitable for sawing mineral materials.

This manual gives instructions on the correct as-

sembly and safe use of your chain saw. It is impor-

tant that you read these instructions carefully.

Technical data

Chain saw

AKE 30 S AKE 35 S AKE 40 S

Part number (typ)

3 600 H34 4.. 3 600 H34 5.. 3 600 H34 6..

Rated power [W] 1800 1800 1800

Chain speed (no load) [m/s] 9 9 9

Chain bar length [cm] 30 35 40

Tool-less chain

tensioning (SDS) ● ● ●

Nose sprocket

– ● ●

Kickback Brake

● ● ●

Chain type

3/8" - 90 3/8" - 90 3/8" - 90

Drive link thickness [mm] 1.1 (0.043") 1.1 (0.043") 1.1 (0.043")

Amount of drive links

45 52 57

Oil reservoir capacity [ml] 200 200 200

Automatic oiler

● ● ●

Metal gripping teeth

● ● ●

Weight without mains cable.

approx. ** [kg] 3.9 4.0 4.1

Protection class

/ II / II / II

**measured with chain bar and chain

Note: Please observe the order number of your machine. The trade names of individual machines can vary.

Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-

fected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.

Intended Use Introduction

F 016 L70 540 - GB Seite 3 Montag, 9. Februar 2009 3:37 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AKE 35 S in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AKE 35 S Manual

Product: