Manual Bosch AHS 70-34 (page 10 of 127) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

473352

Zoom out

Zoom in

1/127

F 016 L70 832 | (23.11.11) Bosch Power Tools

10 | English

Safety Notes

Explanation of symbols

Read instruction manual.

Do not use the hedgecutter in the rain or

leave it outdoors when it is raining.

Switch off and remove plug from mains be-

fore adjusting, cleaning or if the cable is en-

tangled or if the cable is cut or damaged

and before leaving the hedgecutter unat-

tended for any period.

Wear ear protection.

General Power Tool Safety Warnings

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may result in electric shock,

fire and/or serious injury.

Save all warnings and instructions for future refer-

ence.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

Work area safety

f Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

f Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable liq-

uids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

f Keep children and bystanders away while operat-

ing a power tool. Distractions can cause you to lose

control.

Electrical safety

f Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapt-

er plugs with earthed (grounded) power tools. Un-

modified plugs and matching outlets will reduce

risk of electric shock.

f Avoid body contact with earthed or grounded sur-

faces, such as pipes, radiators, ranges and refrig-

erators. There is an increased risk of electric shock

if your body is earthed or grounded.

f Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

f Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges and moving

parts. Damaged or entangled cords increase the

risk of electric shock.

f When operating a power tool outdoors, use an ex-

tension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

f If operating a power tool in a damp location is un-

avoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk

of electric shock.

Personal safety

f Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A mo-

ment of inattention while operating power tools

may result in serious personal injury.

f Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will re-

duce personal injuries.

f Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on

the switch or energising power tools that have the

switch on invites accidents.

f Remove any adjusting key or wrench before turn-

ing the power tool on. A wrench or a key left at-

tached to a rotating part of the power tool may re-

sult in personal injury.

f Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

f Dress properly. Do not wear loose clothing or jew-

ellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

f If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust col-

lection can reduce dust-related hazards.

Power tool use and care

f Do not force the power tool. Use the correct pow-

er tool for your application. The correct power tool

will do the job better and safer at the rate for which

it was designed.

f Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must

be repaired.

f Disconnect the plug from the power source and/or

the battery pack from the power tool before mak-

ing any adjustments, changing accessories, or

storing power tools. Such preventive safety meas-

ures reduce the risk of starting the power tool acci-

dentally.

f Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the pow-

er tool or these instructions to operate the power

tool. Power tools are dangerous in the hands of un-

trained users.

f Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

f Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a haz-

ardous situation.

Service

f Have your power tool serviced by a qualified re-

pair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

Hedge trimmer safety warnings

f Keep all parts of the body away from the cutter

blade. Do not remove cut material nor hold mate-

rial to be cut when blades are moving. Make sure

the switch is off when clearing jammed material. A

moment of inattention while operating the hedge

trimmer may result in serious personal injury.

f Carry the hedge trimmer by the handle with the

cutter blade stopped. When transporting or stor-

ing the hedge trimmer always fit the cutting de-

vice cover. Proper handling of the hedge trimmer

will reduce possible personal injury from the cutter

blades.

f Hold the power tool by insulated gripping surfac-

es only, because the cutter blade may contact hid-

den wiring or its own cord. Cutter blades contact-

ing a “live” wire may make exposed metal parts of

the power tool “live” and could give the operator an

electric shock.

f Keep cable away from cutting area. During opera-

tion the cable may be hidden in shrubs and can be

accidentally cut by the blade.

Additional safety warnings

f This tool is not intended for use by persons (includ-

ing children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

WARNING

OBJ_BUCH-1549-001.book Page 10 Wednesday, November 23, 2011 2:17 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AHS 70-34 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AHS 70-34 Manual

Product: