707739

Bosch AdvancedGrind 18 Manual

21
Zoom out
Zoom in
Previous page
1/293
Next page
English | 21
Bosch Power Tools 1 609 92A 47W | (24.11.17)
Protection Guard for Cutting
For cutting with bonded abrasives, always use the
protection guard for cutting 12.
The protection guard for cutting 12 is mounted in the same
manner as the protection guard for grinding 11.
Auxiliary Handle
Operate your machine only with the auxiliary handle 8.
Screw the auxiliary handle 8 on the right or left of the machine
head depending on the working method.
Hand Guard
For operations with the rubber sanding plate 19 or with
the cup brush/wheel brush/flap disc, always mount the
hand guard 18.
The hand guard 18 is fastened with the auxiliary handle 8.
Mounting the Grinding Tools
Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
Do not touch grinding and cutting discs before they
have cooled down. The discs can become very hot while
working.
Clean the grinder spindle 10 and all parts to be mounted.
For clamping and loosening the grinding tools, lock the grind-
er spindle with the spindle lock button 2.
Actuate the spindle lock button only when the grinder
spindle is at a standstill. Otherwise, the machine may be-
come damaged.
Grinding/Cutting Disc
Always use the quick-clamping nut 17 to mount the
grinding and cutting discs.
Pay attention to the dimensions of the grinding tools. The
mounting hole diameter must fit the mounting flange without
play. Do not use reducers or adapters.
When using diamond cutting discs, make sure that the arrow
indicating the direction of rotation on the diamond cutting
disc matches the direction of rotation of the power tool (see
the direction of rotation arrow 9 on the machine head).
See graphics page for the mounting sequence.
A plastic part (O-ring) is fitted around
the centring collar of mounting flange
13. If the O-ring is missing or dam-
aged, the mounting flange 13 must
be replaced before resuming opera-
tion.
Use the quick-clamping nut 17 to secure the grinding/cutting
disc without the need for additional tools.
Fold up the bar on the quick-clamp-
ing nut 17 and screw the quick-
clamping nut 17 onto the locked
spindle.
Tighten the quick-clamping nut 17 by
hand.
Fold down the bar to secure the
quick-clamping nut 17.
To release the grinding/cutting disc,
fold up the bar on the quick-clamping
nut 17.
Unscrew the quick-clamping nut 17
to remove it from the locked spindle.
After mounting the grinding tool, and before switching
on, check whether the bar on the quick-clamping nut
17 is folded down.
After mounting the grinding tool and before switching
on, check that the grinding tool is correctly mounted
and that it can turn freely. Make sure that the grinding
tool does not graze against the protection guard or
other parts.
Flap Disc
For operations with the flap disc, always mount the
hand guard 18.
Rubber Sanding Plate
For operations with the rubber sanding plate 19,
always mount the hand guard 18.
See graphics page for the mounting sequence.
Screw on the round nut 21 and tighten with the two-pin
spanner.
Cup Brush/Disc Brush
For operations with the cup brush/wheel brush, always
mount the hand guard 18.
See graphics page for the mounting sequence.
The cup brush/disc brush must be able to be screwed onto
the grinder spindle until it rests firmly against the grinder
spindle flange at the end of the grinder spindle threads.
Tighten the cup brush/disc brush with an open-end spanner.
Carbide grinding head
A grinding head may be used only with a suitable pro-
tective guard.
OBJ_BUCH-2850-004.book Page 21 Friday, November 24, 2017 11:44 AM
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch AdvancedGrind 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedGrind 18 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 26,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info