Manual Bosch AdvancedDrill 18 (page 17 of 227) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

707735

Zoom out

Zoom in

1/227

u Apply pressure only in direct line with the bit and do

not apply excessive pressure.Bits can bend causing

breakage or loss of control, resulting in personal injury.

Additional safety information

u Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

u Always wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

u Switch the power tool off immediately if the applica-

tion tool becomes blocked. Be prepared for high

torque reactions which cause kickback. The applica-

tion tool becomes blocked when it becomes jammed in

the workpiece or when the power tool becomes over-

loaded.

u Use suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

u In case of damage and improper use of the battery, va-

pours may be emitted. Ensure the area is well-ventilated

and seek medical attention should you experience any ad-

verse effects. The vapours may irritate the respiratory

system.

u Do not open the battery. There is a risk of short-circuit-

ing.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Only use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g.

against continuous intense sunlight, fire,

water, and moisture. There is a risk of explo-

sion.

u Do not hold the power tool by the unlocking ring dur-

ing operation or transportation. Pulling on the unlock-

ing ring unintentionally can release the adapter and lead

to injuries or damage to the tool.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended use

The power tool is intended for driving and loosening screws

and for drilling in wood, metal, ceramic and plastic. The Ad-

vancedImpact 18 is also designed for impact drilling in brick,

masonry and stone.

Product Features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

Unlocking ring

(2)

Tool holder

(3)

Torque presetting ring

(4)

Mode selector switch

(5)

Right rotational direction indicator

(6)

Left rotational direction indicator

(7)

Electronic rotational direction switch

(8)

Battery release button

(9)

Battery

(10)

Handle (insulated gripping surface)

(11)

Magnetic bit holder

(12)

Light

(13)

Battery charge indicator

(14)

On/off switch

(15)

Magnetic cap

(16)

Screw holder

(17)

Angle screw adapter

(18)

Drill chuck adapter

(19)

Off-set angle adapter

(20)

Screwdriver bit

(21)

Universal bit holder

Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Technical Data

Cordless drill/driver

AdvancedDrill 18

Cordless combi drill

AdvancedImpact 18

Article number

3 603 JB5 0.. 3 603 JB5 1..

Rated voltage V= 18 18

No-load speed

English | 17

Bosch Power Tools 1 609 92A 4BE | (07.09.2018)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch AdvancedDrill 18 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 18,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch AdvancedDrill 18 Manual

Product: