Manual Bosch 0 607 452 604 (page 20 of 126) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

97286

Zoom out

Zoom in

1/126

20 | English 3 609 929 A78 • 8.8.06

Setting the Torque

The tightening torque is dependent on the spring pre-

tension of the shut-off clutch. The shut-off clutch

responds in right as well as left rotation when the

torque setting is reached.

For setting the individual tightening torques, use only

the adjustment tool 19 provided.

Turn the protective sleeve 3 until a slot is visible in the

housing. Use an open-end wrench to turn the tool bit

holder 11 slowly. When a small indentation (adjusting

dial 20) is visible in the clutch, insert the adjustment

tool 19 into the indentation and turn it.

Turning in the clockwise direction results in a higher

torque, in the counterclockwise direction, a lower

torque.

Remove the adjustment tool 19. Further turn the pro-

tective sleeve 3 until it is felt to lock in place.

Note: The required adjustment is dependent on the

type of threaded connection and can be best deter-

mined by practical trials. Check the trial screwings with

a torque wrench.

f Set the torque only in the specified perfor-

mance range, otherwise the shut-off clutch

will no longer respond..

f For higher torques, a correspondingly greater

counterforce is necessary. This counterforce can

be better accommodated by using a clamping

device.

Adjusting the Angled Drive Head

The angled drive head 1 with tool bit holder 11 can be

continuously adjusted around°. To this end, you can

hold the nutrunner in place in the clamping area 10.

Loosen the lock nut 2 by inserting an appropriate tool

into an opening of the lock nut and turning the lock nut

in the direction of the arrow a (left thread).

Turn the angled drive head 1 in the direction of the

arrow b until the desired working angle is reached, but

not more than once around 360°.

Fix the angled drive head 1 in place in this position by

turning the lock nut 2 in the direction of the arrow c

against the angled drive head. Retighten the lock nut 2

using a tightening torque of about 80 Nm.

Screw Counting Port

The tool offers the possibility, via a screw counting port,

of receiving automatically a shut-off signal when the

torque setting is reached. This shut-off signal serves,

for example, for controlling a conveyer belt and docu-

mentation of the bolting actions during fabrication or

controls the bolt feeding for an automatic bolting

machine.

If you want to operate the tool with a screw counting

port, please consult your authorized Bosch customer

service center.

OBJ_BUCH-220-001.book Page 20 Tuesday, August 8, 2006 9:41 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch 0 607 452 604 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch 0 607 452 604 Manual

Product: