97284
17
Zoom out
Zoom in
Previous page
1/126
Next page
English | 173 609 929 A78 8.8.06
Noise/Vibration Information
Measured sound values determined in accordance with
EN ISO 15744.
Measured vibration values determined in accordance
with EN 28662 and EN ISO 8662.
Typically the A-weighted noise levels of the tool are:
sound pressure level 80 dB(A); sound power level
93 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
The hand-arm acceleration is typically below 2.5 m/s
2
.
Uncertainty K=1.2 m/s
2
.
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or stan-
dardization documents: EN 792, according to the
provisions of the directive 98/37/EC.
03.08.2006, Robert BoschGmbH, Power Tools Division
D-70745 Leinfelden Echterdingen
Technical Data
Assembly
Suspension and clamping device
f If you wish to operate the pneumatic tool in a
suspension or clamping device, make sure
that the pneumatic tool is first mounted in the
device before you connect it to the air supply.
In this way you avoid starting the tool accidentally.
You can use the clamping area 10 to mount the pneu-
matic tool in a clamping device. If possible, use the
entire clamping area. The smaller the clamping area,
the stronger the clamping force.
Do not overstrain the clamping area and make sure that
the clamping device holds the tool securely and tightly.
With the hanging hoop 4, the pneumatic tool can be
attached to a suspension device.
f Regularly check the condition of the hanging
hoop and the hook of the suspension device.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Pneumatic Angle Nutrunner with Shut-off Mechanism
Article number 0 607 452 603 0 607 452 604 0 607 452 605
No-load speed n
0
rpm 570 400 320
Output power W
Hp
550
0.74
550
0.74
550
0.74
Max. torque for hard/soft screwdriving
application according to ISO 5393
Nm
ft-lbs
1640*
11.829.5*
1656*
11.841.3*
2068*
14.750.1*
Max. screw dia. mm M6 M8 M8
Rotational direction
Tool holder 3/8" 3/8" 3/8"
Lever start zzz
Shut-off clutch z z z
Rated pressure bar
psi
6.3
91
6.3
91
6.3
91
Connecting thread G1/4" G1/4" G1/4"
Inside hose diameter mm
in
10
3/8"
10
3/8"
10
3/8"
Air consumption under load l/s
cfm
15
31.8
15
31.8
15
31.8
Weight according to
EPTA-Procedure 01/2003
kg
lbs
1.50
3.30
1.50
3.30
1.50
3.30
* When the tool is used in the upper torque range, it must be supported by using a reaction bar.
OBJ_BUCH-220-001.book Page 17 Tuesday, August 8, 2006 9:41 AM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch 0 607 452 603 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch 0 607 452 603 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info