555077
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
Vacuum Cleaner
DEAR CUSTOMER!
Congratulations on the purchase of BORT product,
which has progressive design and high quality. We
hope that our products will be your companion for
many years.
For the ef cient and safe use of the product, please
read this manual and save it for future reference.
SPECIFICATIONS 1
MAINTENANCE INSTRUCTIONS 2
1. Handle
2. 2-in-1 Tool
3. Air Escape Pushbutton
4. crevice Tool
5. Hose
6. Release Button
7. Telescopic Tube
8. Floor brush
9. Handle Of Dust
10. Release Button Of Dust
11. Cyclone dust container
12. Switch Pedal
13. Tube Support
14. Power plug
15. Cord reeling pedal
ATTENTION: All schematic pictures may differ from the
actual product
COMPLETE SET
Standard complete set of the product includes:
Vacuum Cleaner
Hose
Telescopic tube
Crevice nozzle
Multi brush
Brush for upholstery and carpets
Owner’s manual
Due to the constant improvement of the technical
characteristics of the models, we reserve the right to
make changes in construction and/or complete set of
product.
SAFETY AND SECURITY
1.Be sure to use the cleaner in compliance with the
contents of this manual, and use the ttings designated
by the manufacturer.
2. Please do not leave the cleaner when it is powered
on. Turn off the power switch and pull out the power
plug when not using or before maintenance.
3. Please do not pull or carry the cleaner by the power
cord, or nip it when closing a door; keep the cord free
from the press of the cleaner.
4. Please do not let children take the cleaner as a toy,
and close attention is necessary when the cleaner ap-
proaches children.
5. Please do not use the cleaner when its power cord or
plug is damaged. Send it to the appointed service cent-
er. Please do not unplug by pulling the cord or plug. To
unplug, grasp the plug, not the cord.
6. Never pull the power plug or use the cleaner with
wet hands.
7. When using the cleaner, pay attention to prevent any
hair roll or other rubbish block up the air inlet (includ-
ing the hose and the spile), otherwise motor failure and
housing distortion may be caused. If the matters ab-
sorbed in forms a blockage, stop the cleaner by pulling
out the power plug immediately to clean the blockage.
8. When using the cleaner, don’t plug up the air outlet
by towel or other matters, otherwise the ef ciency of
dust absorbance will be in uenced, and the motor will
be at high risk of being burnt out.
9. Never use the cleaner at uneven oor or ground;
and be very careful when cleaning stairs to prevent the
cleaner from falling down.
10. Never absorb live stumps with the cleaner, other-
wise the motor may be damaged.
11. The cleaner should be kept far away from heat
sources (such as central heating, oven, etc) to avoid
the distortion of plastic parts as well as the in uence
caused by such distortion.
12. Before using the cleaner, please remove big and
sharp matters on the oor to avoid damaging the plas-
tic parts, lter gauzes and motor.
13. Never absorb water or other liquid with this cleaner,
otherwise, the motor will be damaged.
14. This appliance is not intended for use by persons
(including children), with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety.
ASSEMBLY INSTRUCTIONS
1. Before assembling the cleaner, please con rm all
parts and components for the cleaner are received by
referring to Parts and Components List.
2. Please remember to cut off the power supply before
assembly.
ASSEMBLY OF HOSE
1. As is shown in Figure (3), insert the hose into the
duct inlet of the machine body in horizontal direction.
Please pay attention to the alignment of two projecting
parts. Turn the hose right when it is pushed into the
bottom, a click of inserting sound may be heard, i.e. the
hose is assembled into the machine body completely.
2. ASSEMBLY AND REMOVAL OF DUST
BARREL
As is shown in Figure (4), place the bottom of the dust
barrel on the projecting part at the front end of the
machine body, and press down the dust barrel. When
the front-end hook is entered into the corresponding
part of the machine body completely, and a click of
inserting sound is heard, which indicate that the dust
barrel is assembled in place. To remove the dust barrel,
press down the handle of the dust barrel; when the
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bort BSS-1800N-ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bort BSS-1800N-ECO in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info