Manual Boretti Michelangelo (page 69 of 74) (English, Dutch, French, Spanish)

533815

Zoom out

Zoom in

1/74

Burner removal for cleaning

1. Ensure the gas supply is off and grill is

cool.

2. Remove cooking grids and upper ﬂavor

shields.

3. Remove the burner mounting screw located

at the very back of burner near the rear of

the ﬁrebox.

4. Remove burners by lifting up and out of ﬁre-

box on an angle. Repeat for all burners.

5. Clean the outside of the burners with a

brass bristle wire brush and make sure all

gas ports are clear. Use a straight coat

hanger to clear any obstructions.

6. Use a ashlight to look into the venturi end

of the burner to check for blockages. If nec-

essary, use a straight coat hanger to clear

any obstructions.

7. Inspect and clean the venturi end of the

burner by removing the venturi set screw

on the end of the burner and removing the

venturi shutter. Once removed, make sure

the burner is thoroughly cleaned and the

venturi shutter is re-installed with an open-

ing of ¼” for propane. (note: ensure that

the venturi set screw is tight after setting

the correct air shutter opening.

8. Re-install and secure burner.

9. Re-mount ﬂame tamers and cooking grids.

10. Light each burner to ensure they are oper-

ating correctly.

Note: When installing burners, it is very impor-

tant to center the burner over the gas oriﬁce.

You should look under the main control panel

with a ﬂashlight once installed to make sure

they are in the proper position. Failure to clean

and install burners correctly could result in ﬁre

or explosion.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti Michelangelo in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti Michelangelo Manual

Product: