533769
94
Zoom out
Zoom in
Previous page
1/100
Next page
94
The Ceramic
Cooktop
The ceramic zones are controlled by knobs with
13 positions. In “0” position, the zone is switched
off. The ceramic zone is activated as soon as a
position between 1 – 12 is selected. If you select
a position, the zone will emanate a red glow and
emit heat to both the pan as well as the ceramic
glass.
Some zones have an extension zone. This can be
activated by turning the knob related to the zone
in question past 12. By turning the knob past 12
again, the extension zone will be switched off.
There is a residual heat indicator lamp for each
zone, which indicates that the zone is hot. The
lamp will continue to burn as long as the zone is
hot, even after it has been switched off.
Important instructions:
Do not leave the cooking zones switched on if no
pot or pan is on them. Avoid temperature chang-
es to the glass ceramic cooktop. For example, do
not pour cold water on a hot cooktop. Make sure
the pan completely covers the cook zone, and that
it is in the middle of the zone.
Avoid contact between sugar, synthetic fabrics
or aluminium foil and the hot glass plate. These
materials could cause damage to the vitroceramic
surface, or even cause it to crack: switch off the
appliance and remove these from the surface im-
mediately (warning: risk of burn injuries!)
You can clean the ceramic cooktop just like any
other glassware, with a soft and moist cloth.
There are special cleaning agents for ceramic
glass plates.
The induction cooker
How induction works
Under each cooking zone is an induction coil.
When the cooking zone is switched on, the coil
produces an electromagnetic field that generates
an energy field in the ferromagnetic bottom of
the pan. The bottom of the pan completes the
magnetic field, causing the pan on the zone to
become warm.
Consider the following before you use an induction
cooker:
Make sure you have magnetic pans (you can test
them with an ordinary magnet). Enamelled pans,
stainless steel pans with ferromagnetic bottoms
and cast iron pans all work just fine.
The induction zone automatically adjusts to the
diameter of the pan. If the pan is too small, the
cooking zone will not work. If the pan is not suit-
able for the cooker, [U] will be shown on the dis-
play.
Operation:
By turning the knob clockwise, you can select a
setting between 1 and 9. If you turn the knob past
setting 9, you select the booster setting that pro-
vides extra power to the induction cooker for a
short time. This is handy for browning meat or
quickly bringing water to a boil.
Childlock:
The controls of the induction zones can be blocked.
This can be done by simultaneously turning the
furthest knob to the left and the fifth knob from
the left in an anticlockwise direction, and holding
them there for three seconds. When this is done,
an ‘L’ should appear on the display.
To release the childlock again, you must once
again turn these two knobs in an anticlockwise
direction and hold for three seconds.
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti kookplaten 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti kookplaten 2012 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info