731628

Boretti IBRIDO Manual

39
Zoom out
Zoom in
Previous page
1/63
Next page
17
5.4 Stainless-steel
After the first time of use, parts of the barbecue may become discoloured by the intense heat that
comes from the burners. This is normal.
Purchase a cleaning product for stainless steel and use this when brushing the metal down. It may be
possible for grease spots to fall on the stainless-steel parts and get burnt on, which may cause some
parts to look worn. Use a cleaning product that is not abrasive together with a cleaning product for
stainless steel, to remove the grease.
5.5 Changing the battery on the ignition (if present)
Turn the knob on the ignition loose and remove the AA battery. Put a new AA battery in place.
5.3 Grill racks
The grill racks can be cleaned immediately after cooking, once the barbecue has been switched off,
with the use of an appropriate cleaning brush. Cleaning the grill racks by using water and a degreaser
heightens the chance of oxidation/rust. You can counteract this by coating the grill racks with some
olive oil after cleaning.
5.1 Cleaning
Do not use any abrasive cleaning fluids on the barbecue. These can cause scratches or damage to the
surface of the equipment.
•Warm the barbecue up by lighting the main burners on their highest setting and shutting the
lid. Do not turn on the infra-red burner(s)!
•Let the barbecue warm up for about 10 minutes to 250 degrees (Celsius).
•Turn the burners off and let the machine cool down before you start cleaning.
•Clean the racks and baking trays with a suitable cleaning brush (Available from the Boretti
Web shop).
•Remove the baking racks and the baking tray.
•Brush charred (food) remains towards the grease receptacle.
•Remove the grease receptacle and clean this with warm water and detergent.
•Use warm water and detergent to clean the outside of the barbecue.
•Dry the barbecue with a soft, clean cloth.
5.2 Grease receptacle
The grease receptacle must be cleaned regularly to avoid a build-up of dirt and remnants.
Note: ensure that the grease receptacle has cooled down before you clean it.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti IBRIDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti IBRIDO in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info