Manual Boretti CRI915 Carrara (page 20 of 272) (English, German, Dutch, French)

798851

Zoom out

Zoom in

1/272

It is possible to connect the gas in the following ways:

* using iron or copper rigid pipe;

* using uninterrupted stainless steel flexible pipe with a mechanical fitting

conforming to standards regulation norm (maximum length of extended

pipe 2000 mm). The pipe should be connected straight to the elbow of the

ramp;

* by inserting a flexible rubber pipe conforming to regulation norm in force.

This pipe should be coupled straight to the rubber-holder P corresponding

to the gas used, and locked with a clamp F conforming to standards

regulations in force. In the latter case, check the expiry date printed on the

pipe and replace it before that date.

LIQUID GAS METHANE GAS

Using flexible rubber pipes with a max. length of 1500 mm:

* do not allow the pipes to be constricted or crushed;

* pipes must not be subject to tractive force or torsional stress;

* do not allow the pipes to come into contact with cutting or sharp edges,

etc...

* do not allow the pipes to come into contact with parts that can reach

temperatures of 70°C above room temperature;

* make sure the entire length of the pipes can be inspected;

* do not use the Natural Gas Regulator supplied with the appliance for

Propane Gas.

Important:

In Belgium, in accordance with Belgian standards NBN D 51-003 and NBN

D 51-006, the type of connection with elastomer hose (Flexible rubber pipe)

is prohibited for cookers installed inside buildings.

ENBoretti Manual CRG916 / CRI915 / User guide - Installation advice

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti CRI915 Carrara in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti CRI915 Carrara Manual

Product: