798851
18
Zoom out
Zoom in
Previous page
1/272
Next page
18
than 2 m3 /h per kW of power (see total power in kW shown on the appliance
plate).
In all other cases, i.e. when other gas appliances are present in the same room,
or, if it is not possible to have natural direct ventilation, it is necessary to create
natural, indirect ventilation or forced ventilation: for this type of operation, it
is necessary to contact a qualified technician for installing and creating the
ventilation system in strict compliance with the guidelines set out in current
standards.
The openings should be positioned so as not to allow the formation of any
unpleasant air current for the occupants. Furthermore, it is forbidden to use
flues already used by other appliances to expel products of combustion.
3.5 Gas connection
Note:
The appliances setting conditions are stated on the plate on the back of the
appliance. Gas-powered devices for home use, which are not connected
to a conduit for the evacuation of combustion products, must not cause
a concentration of carbon monoxide that could pose a health risk to the
persons exposed in relation to the time of exposure.
We recommend checking that the appliance is properly
set up for the type of gas distributed. The connection to
the gas pipes must be made in a workmanlike manner,
in compliance with current standards that prescribe the
installation of a safety tap at the end of the pipe. The
threaded ½” gas connection pipe is located at the rear
on the right hand side of the appliance.
For butane and propane, a pressure reducer conforming to standards
regulations UNI-CIG 7432 in force should be prepared. The seals must conform
to standards regulations UNI-CIG 9264 in force. Once the gas has been
connected, check the seal of the unions with a soap and water solution.
ENBoretti Manual CRG916 / CRI915 / User guide - Installation advice
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti CRI915 Carrara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti CRI915 Carrara in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info