533754
80
Zoom out
Zoom in
Previous page
1/90
Next page
80
Using the burners
To obtain the maximum efciency without was-
ting gas, the pot diameter must be suitable in
relation to the burner (see the following table),
to avoid the flame extending beyond the bottom
of the pot.
Use the maximum capacity to quickly make the
liquids reach the boiling temperature, and the
reduced capacity to heat food or maintain the
boil.
Precautions
The appliance is equipped with a device that
attempts to re-light the burner if the ame
blows out accidentally. If the burner does not
light after 3 attempts, it will lock out and the
letter “b” will appear on the relevant display.
In this case, perform the reset procedure as
described below.
Fat and oil can catch fire when overheated so
use caution when cooking in fat or oil.
Do not use sprays near the appliance when
it is in operation.
Do not place unstable or deformed pots on
pan support: risk of overturning or spillage
of contents.
Make sure pot handles are positioned cor-
rectly.
When the burner is lit, check that the flame is
even and, before removing pots, always turn
down the flame or switch off the burner.
Burners Power Ø Pot
(W) diameter
Auxiliary 1000 10 - 14 cm
Semi-rapid 1650 16 - 18 cm
Rapid 3000 20 - 22 cm
Triple crown 4000 24 - 26 cm
General precautions
Cleaning
Before cleaning, disconnect the appliance from
the electricity supply. Do not clean the applian-
ce with steam cleaners. The appliance should
be cleaned only when it is cold.
Glass ceramic and steel parts
Remove food residues and grease spatters
from the cooking surface using the special
scraper (optional).
Then clean the area using SIDOL, STAHLFIX or
a similar product and a paper towel.
Do not use sponge scourers or chemical de-
tergents.
Burners and pan supports
These parts can be removed for easier clea-
ning. The burners must be washed with a spon-
ge and soapy water or with a mild detergent,
dried thoroughly and lodged in their seat per-
fectly. Make sure that the burner cap holes are
not clogged. Ensure the safety valve probe and
ignition electrode are always perfectly clean to
ensure optimal operation.
The pan supports can be washed in a dish-
washer. All operations concerning installation,
adjustment
and adaptation to the available gas type must
be carried out by a qualified technician,
in compliance with statutory legislation.
The specific instructions are given in the sec-
tion of the handbook reserved for
the installer.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BTG80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BTG80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Boretti BTG80

Boretti BTG80 User Manual - English, German, Dutch, French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info