533754
78
Zoom out
Zoom in
Previous page
1/90
Next page
78
Minimum flow adjustment (4-burner version)
The minimum flow is correctly adjusted when the flame remains lit without a pot on the pan sup-
port in position 1 of the burner control.
To adjust the minimum flow of each burner, proceed as follows:
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the figure above.
“MIN” will appear on the display indicating the activation of the adjustment procedure.
At this stage, select the burner to be adjusted using the “+and “-” buttons. By pressing these
buttons repeatedly, a LED will light up showing the selected burner.
To confirm the selected burner, press the timer button.
The selected burner will light on the minimum setting. To increase or decrease the minimum flow,
use the “+” and “-” buttons of the specific burner.
During the adjustment procedure, the selected burner display will show “-” if the set minimum level
corresponds to the factory setting.
^ or v will flash on the display if the flow rate is respectively higher or lower than the preset flow
rate.
To go to the next burner, repeat the procedure from the second figure.
After adjusting all the burners, press the timer button again to exit the procedure. The minimum
flow settings are saved and will be used each time you use the appliance.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BTG80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BTG80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Boretti BTG80

Boretti BTG80 User Manual - English, German, Dutch, French - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info