533726

Boretti BS45 Manual

16
Zoom out
Zoom in
Previous page
1/132
Next page
Description of illuminated symbols
« AUTO » - (flashing) - Programmer in automatic position, but not programmed.
« AUTO » - (on steady) - Programmer in automatic position, with program inserted.
Automatic cooking operation
Timer in operation
and
« AUTO » (both flashing) – Programme error
No symbol on except for numbers on clock: programmer set in manual mode.
Digital clock
Indicates hours (0-24) and minutes.
Immediately after connection (as well as after a power outage), three intermittent numerals
are shown on the display.
To set the correct time, press:
+ : simultaneously and at the same time one of the [+]
or [-] buttons until you have the correct time.
The speed with which the numerals change on the display increases substantially a few
seconds after pressing the
[+] or [-] buttons.
Manual cooking
(without programmer)
To use the oven without the programmer, you will need to cancel the flashing «AUTO»
message
.
To do so, just press the button.
If the «AUTO» message is steady, showing that the oven has been programmed, you will need
to cancel the programme by pressing
so that the display shows zero.
Automatic cooking
(cooking start and stop)
1) Programme the length of cooking time with :.
2)
Programme the cooking stop time with .
3) Select the desired temperature and function using the thermostat commands and by
pressing the switch, the «AUTO» symbol on the display will indicate that the oven has been
programmed.
Practical example
:
As an example: you want to cook for 45 minutes, ending at 14.00.
- Press
to set 0.45 on the display.
- Press
to set 14.00 on the display.
After doing this, the display will once again show the current time and the «AUTO»
symbol, to indicate that your programming has been understood and memorized.
At 13.15 (14.00 less 45 minutes), the oven will start automatically, and during cooking
the symbols
and «AUTO» will be shown.
At 14.00 the cooking will automatically stop, and a buzzer will sound, which can be
stopped by pressing
.
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BS45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BS45 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info