Switch off the extension zone
Action Control panel Display
Stop touch the key [
] extension zone control light is blinking
touch the key [-] or [+] [1] to [9]
Saving the concentric heating zone function
The software remembers the last switching state of each zone (small or big diameter). After
switching on the cooking zone again, the last state will be activated, if the extension zone is
activated or not.
Timer
The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the “Egg Timer”
The “Egg Timer” is independent from the heating zones. If this timer is on and you stops the
hob, the “Egg Timer” will continue until the end of the time.
Action Control panel Display
To start: touch the key [0/I] [0]
To select the “Egg Timer” press once on timer key [00]
[-] and [+] simultaneously
Decrease the time press on timer key [-] [30] wents to 29,28,…
Increase the time press on timer key [+] the time increases…
When the time reaches [00.] it is blinking and beeping.
To stop the “Egg Timer”
Action Control panel Display
To select the “Egg Timer” press once on timer key the time displays
[-] and [+] simultaneously
To stop the “Egg Timer” press on timer key [-] displays [01]
press second time on
timer key [-] displays [00]
Setting and modification of the cooking time of a heating zone
Action Control panel Display
To select a heating zone press on key [+] [4]
To select the power level press on key [+] or [-] [1] to [9]
To select the « Timer » press on timer key [-] and [+] timer control light
simultaneously until the from the desired
desired heating zone heating zone is on
Decrease the time press on timer key [-] [30] wents to 29,28,…
Increase the time press on timer key [+] the time increases…
The time is congured and the cooking starts until the time reaches [00].
