Manual Boretti BGR-116 (page 46 of 50) (English, Dutch, French, Spanish)

647499

Zoom out

Zoom in

1/50

Attention: Check the condition of the ﬂexible

gas pipe periodically and change it whenever

you notice it is deteriorating. It is advisable to

check it at least once a year. It must only be

changed by qualiﬁed personnel.

– If the burner ﬂame goes out accidentally,

close the knob and do not attempt to light it

again for at least 1 minute.

– When gas cooking appliances are used they

produce heat and humidity in the room in

which they are installed. Please ensure good

aeration in the room keeping the natural ven-

tilation vents free and open or install a suc-

tion hood with discharge duct.

– An intensive and prolonged use of the appli-

ance might need additional aeration like, for

instance, the opening of a window or a more

effective aeration, increasing mechanical

suction power if it exists.

Lubricating the cocks periodically

This must be done by qualiﬁed personnel whom

you must contact also if the appliance is mal-

functioning.

It is however advisable each time work is done

on the cocks, to change the cocks and gasket.

Knobs

– The gas hob burner knobs are ONLY TO BE

REMOVED for servicing (regulating the mini-

mum ﬂame) and NOT for cleaning.

– They are to be replaced in the correct order

and in their original position. Any changes

will result in the appliance malfunctioning.

If the problems persist or cannot be reme-

died with the above suggestions, contact the

nearest Assistance Centre explaining the

problem found, the model, the item and serial

number of the appliance written on the guaran-

tee certiﬁcate.

Attention

This appliances can be installed and used only

on permanently ventilated premises in accor-

dance with the standards.

Installation premises

To ensure the gas-run appliance works proper-

ly the room in which it is installed must have

enough air for the combustion gas, in compli-

ance with the current standards. Vents with

a minimum section of at least 100 cm², must

be made so they cannot be obstructed either

from indoors or outdoors and located close to

the ﬂoor; any other type of ventilation must

necessarily comply with the contents of the

standard.

Fumes discharge

Gas-run appliances must discharge the pro-

ducts of combustion directly outdoors through

Warnings

Problems and

suggestions

Problem Suggestions

The gas ﬂow seems

irregular

Smell of gas in the room

– Check that the gas cock

is open.

– Clean the holes of the

ﬂame breaker and the

nozzle.

– Check the position of the

burner.

– Check the knobs are in

the OFF position

– Check the condition of

the feeding pipe and its

connections.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BGR-116 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 3,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Boretti BGR-116 Manual

Product: