647499

Boretti BGR-116 Manual

43
Zoom out
Zoom in
Previous page
1/50
Next page
NL
FR
ES
EN
43
Electrical connection
Before connecting to the electricity mains first
check that:
– the electrical supply system is fitted with an
effective earth connection; to the contrary it
must be done separately and in compliance
with current EEC standards;
– The socket or four-pole connecting switch are
easy to reach once the appliance is installed.
The hob is supplied with lead on which a
standardised plug must be fitted that will wit-
hstand the load indicated on the appliance’s ra-
ting plate; the plug must then be plugged into
a suitable socket (Fig. 2). In all cases you must
take the precaution to position the lead so that
it will never exceed a temperature that is 50°C
higher than environmental temperature at any
one point.
The manufacturer declines all responsibility if
these accident prevention rules and regulations
are not abided by.
Connecting gas
– Ensure that it has been adjusted to local fuel
types.
– If it is to be fuelled by liquid gas, only a cer-
tified and approved pressure regulator is to
be used.
– Connect the appliance to gas cylinder or
other gas supply in accordance with local co-
des and regulations.
Connecting appliance
– The hob can be installed with either an ap-
proved stainless steel flexible pipe or a rigid
pipe.
– Connection is made to the GJ1/2” threaded
elbow.
– The gasket has to guarantee the connection
holds fast.
– The elbow can be turned by releasing the nut.
Once the desired position has been establis-
hed it is to be tightened again.
Important: After the installation check there
are no leaks by using a soap solution and never
a flame.
Boretti declines every responsibility if these
safety standards are not respected.
Shaft pipe
Nut
Gasket
Fiting for metal pipe
Fig. 3
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Boretti BGR-116 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Boretti BGR-116 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info