714530
10
Zoom out
Zoom in
Previous page
1/16
Next page
EN
10
Installation
www.bora.com
Pull out the seal [2] on the connection fitting [1] of
the device. This means stretching the seal [2] slightly.
Push the Ecotube duct piece [3] to be connected with
the sleeve on the connection fitting [1] with the
seal [2].
Make sure the seal [2] does not move.
INFO When fitting the seal, make sure it fits and
forms an air-tight seal with the connection duct
piece when compressed.
4.4.3 Replacement
Switch off the cooktop extractor. as shown in the BORA
cooktop extractor operating instructions.
Open the revision option to access you appliance.
Release the device from the mounting brackets or the
Velcro.
Remove the appliance from the ducting.
Clean the ducting with a soft cloth and detergent or
water.
Install the replacement appliance as described in the
Installation section.
Check that all the duct connections are tight and
secure.
Check that the appliance functions correctly.
Do this by putting the cooktop extractor into operation
as shown in the BORA cooktop extractor operating
instructions.
Seal the revision option.
Properly dispose of the used filter.
4.5 Handover to user
Once installation is complete:
Explain the main functions to the user.
Explain all safety-related aspects of operation and
handling to the user.
Provide the user with the accessories and the
operating and installation instructions for safe storage.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora ULB1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora ULB1 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora ULB1

Bora ULB1 Usermanual and installation guide - German - 16 pages

Bora ULB1 Usermanual and installation guide - Dutch - 16 pages

Bora ULB1 Usermanual and installation guide - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info