714530
9
Zoom out
Zoom in
Previous page
1/16
Next page
EN
9
Installation
www.bora.com
4 Installation
Observe all safety and warning information (see the
Safety section).
Follow the enclosed manufacturer’s information.
INFO The product must not be installed above
cooling devices, dishwashers, stoves, ovens,
washing machines or driers.
4.1 Checking the scope of delivery
Name Quantity
BORA air purification box (ULB1) 1
Operating and installation instructions 1
Angle bracket 3
Fixing screw set 1
Tab. 4.1 Scope of delivery
Check the scope of delivery for damage and make
sure it is complete.
If there are any missing or damaged parts, please
notify BORA After Sales Service.
Do not under any circumstances install parts which
are damaged.
Dispose of transport packaging in the proper manner
(see the Decommissioning and Disposal section).
4.2 Tool and aids
The following tool is required to correctly install the
recirculation unit:
Phillips screwdriver
4.3 Assembly instructions
Keep the airflow channels as short as possible.
Do not install the device in floor units or bodies with no
separation from the doors or drawers. as the positive
pressure could cause these to open of their own
accord.
The drawers, back panels and shelves in the floor unit
must be removable for maintenance and cleaning
purposes.
If the device is installed in an adjacent room, air
recirculation must occur in the room in which the
vapour extraction system is installed so as not to
generate any low pressure.
4.4 Installing the device
INFO A return flow aperture of > 500 cm² in the
plinth area must be provided for recirculation.
INFO The air duct diameter must be no less than
150 mm (176 cm²).
INFO With an air duct length of 50 cm, no corner or
bend should be installed before the fan module
(motor).
INFO Install straight duct pieces with a length of at
least 50 cm between the corners or bends.
4.4.1 Installation
Depending on the attachment method, attach the
mounting brackets or Velcro fasteners to the device.
Connect the duct with the duct connection on the
device.
Installation with mounting brackets:
Use the screws provided to attach the housing.
Installation using Velcro:
Remove the protective film from the Velcro fastener on
the outer side of the device.
Use the Velcro fastener to prevent the device from
slipping.
4.4.2 Connect the duct system to the
device.
4
2
1
Fig. 4.1 Connecting the BORA Ecotube duct system (Ecotube
duct connector or Ecotube moulded part)
[1] Connection fittings
[2] BORA Ecotube sealing flat
[3] BORA Ecotube duct piece (Ecotube duct connector or
Ecotube moulded part)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora ULB1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora ULB1 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora ULB1

Bora ULB1 Usermanual and installation guide - German - 16 pages

Bora ULB1 Usermanual and installation guide - Dutch - 16 pages

Bora ULB1 Usermanual and installation guide - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info