714403
51
Zoom out
Zoom in
Previous page
1/60
Next page
EN
51
Cleaning and Maintenance
www.bora.com
1
2
5 4 3
Fig. 8.4 Air guiding housing
[1] Air guiding housing
[2] Housing base
[3] Spigot
[4] Sealing groove
[5] Lock
XXHold the housing base [2] with one hand.
XXRelease the 6 locks [5] around the edge of the base.
XXRemove the housing base [2].
XXClean the air guiding housing [1] and the housing base [2] with
a mild cleaning agent.
Closing the air guiding housing
XXPosition the housing base [2] under the air guiding housing [1]
with the help of the 3 spigots[1].
XXPush the housing base [2] upwards into the sealing groove [4].
XXClose the 6 locks [5].
XXCheck that the housing base is positioned correctly.
XXInside the inlet opening push the filter replacement cover until
it comes to a stop in the filter housing opening (To insert the
filter replacement cover see Fig. 8.11).
XXCheck that the filter replacement cover is positioned correctly.
XXInsert the stainless steel grease filter and the air inlet nozzle.
8.4.4 Removing liquids from the device
Any liquids that flow into the device through the inlet opening
are caught by the stainless steel grease filter (up to 150 ml) and
in the air guiding housing. Do the following:
XXSwitch off the fan and deactivate the after-run function (see
Operation chapter).
XXRemove the air inlet nozzle and stainless steel grease filter
(see Cleaning and Maintenance chapter).
XXEmpty the stainless steel grease filter.
XXCheck whether any liquid has gathered in the base of the air
guiding housing.
XXIf necessary, wipe the liquid up from the housing base from
above through the inlet opening using a sponge or cloth.
XXClean the air guiding housing (see Cleaning and Maintenance
chapter, air guiding housing).
XXTo dry the odour filter and duct parts respectively, switch on
the cooktop extractor at a minimum power level of 5.
XO After 120 minutes the cooktop extractor will automatically
switch to the automatic after-run function
(see Device Description chapter).
8.5 Cleaning the air guiding housing
Grease particles and limescale residues from cooking vapours
can settle on the surface of the air guiding housing. For this
reason, regular cleaning is essential.
The air guiding housing can be found on the bottom of the
cooktop inside the floor unit.
Opening the air guiding housing.
XXMake sure that the cooktop and cooktop extractor are
switched off (see the Operation chapter).
XXWait until the fan level indicator shows
0
.
XXRemove the air inlet nozzle and stainless steel grease filter.
XXInside the inlet opening pull the filter replacement cover out
of the filter housing opening (To remove the filter replacement
cover see Fig. 8.5).
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pure at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pure in the language / languages: English as an attachment in your email.

The manual is 12,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pure

Bora Pure User Manual - German - 60 pages

Bora Pure Usermanual and installation guide - Dutch - 82 pages

Bora Pure User Manual - Dutch - 64 pages

Bora Pure User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info