714356
26
Zoom out
Zoom in
Previous page
1/32
Next page
EN
26
Operation
www.bora.com
The flashing and acoustic signal can be switched off
early by tapping the touch-operated area.
Stopping the short-time timer (egg timer) early:
Tap the touch-operated area on the selector ring.
The short-time timer is prematurely deactivated.
0
appears on the control knob display and an acoustic
signal sounds.
6.3.7 Stop function (pause)
Activating the stop function
Tap the control knob’s touch-operated area.
An acoustic signal sounds and
11
appears on the
control knob’s display.
The cooking session is interrupted.
INFO The cooking session can be paused for a
maximum of 10 minutes. If the stop function is
not disabled again by the end of this period, the
applicable cooking zone will be switched off.
Deactivating the stop function
Tap the control knob’s touch-operated area.
An acoustic signal sounds and the previously set power
level appears on the control knob display.
The cooking session continues.
6.3.8 Switching off the grilling zone
INFO An
H
on the control knob display indicates that
the grilling zone is still hot.
INFO Switch off the grilling zone after use.
Fig. 6.4 Switching o the grilling zone
Turn the selector ring to the 12 o’clock position.
An acoustic signal sounds and the grilling zone is
deactivated.
The cooktop is switched off when there are no longer
any active grilling zones.
Pay attention to the residual heat display
(see the Device description section).
6.3.6 Using the timer function
INFO You can set a time range of between
1 and 120 minutes for the timer functions.
Setting the time
Turn the selector ring to the 11 o’clock position.
t
appears on the control knob display.
Tap the touch-operated area.
An acoustic signal sounds and
000
appears on the
control knob display.
Turn the selector ring within 3 seconds to set the timer.
Turning the ring clockwise increases the time (starting
from 0 minutes); turning it anti-clockwise reduces the
time (starting from 120 minutes).
When set to between 0 and 20 minutes, the time
increases/decreases by a minute at a time. Otherwise,
it increases/decrease by 5 minutes at a time.
If no time is set within the 3 seconds, the timer will be
deactivated and t will appear on the control knob.
Press the touch-operated area within 3 seconds to
confirm the set time.
An acoustic signal sounds and the set value starts to
flash on the control knob display.
Activating the timer function
Turn the selector ring to the power level you desire
within 3 seconds of confirming the set time.
The timer function is activated and the set time counts
down.
The display toggles (every 3 seconds) between the
power level and the remaining time (for more than
2 minutes to the nearest minute, from 2 minutes in
seconds).
Once less than 2 minutes remain, only the remaining
time is displayed.
Once the time runs out, the cooking zone is switched
off, an acoustic signal sounds for 2 minutes and
000
flashes on the control knob display.
The flashing and acoustic signal can be switched off
early by tapping the touch-operated surface or turning
the selector ring to the 12 o’clock position.
Stopping the timer early:
Turn the selector ring to the 12 o’clock position.
0
appears on the control knob display, a signal tone is
emitted and the cooking zone is switched off.
Activating the short-time timer (egg timer)
Turn the selector ring to the 12 o’clock position within
3 seconds of confirming the set time.
The short-time timer is activated and the set time
counts down.
The remaining time appears on the control knob
display (for more than 2 minutes to the nearest minute,
from 2 minutes in seconds).
Once the time runs out, an acoustic signal sounds for
2 minutes and 000 flashes on the control knob display.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKT11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKT11 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKT11

Bora Pro PKT11 User Manual - German - 36 pages

Bora Pro PKT11 User Manual - Dutch - 36 pages

Bora Pro PKT11 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info