714356
25
Zoom out
Zoom in
Previous page
1/32
Next page
EN
25
Operation
www.bora.com
6.3.5 Childproofing feature
INFO The childproofing feature can only be activated
or permanently deactivated if both knob brings
are at the 12 o’clock position and no function is
active.
Activating the childproofing feature
Press the touch-operated area on a control knob for
5 seconds.
An acoustic signal sounds and
L
appears on the control
knob display. The display goes blank after 10 seconds
and the childproofing feature is activated.
Permanently deactivating the childproofing
feature
Press the touch-operated area on a control knob for
5 seconds.
An acoustic signal sounds and
0
appears on the control
knob display. The display goes blank after
10 seconds and the childproofing feature is
permanently deactivated..
Deactivating the childproofing feature for a
cooking session
Turn the selector ring from the 12 o’clock position to a
power level.
L
appears on the control knob display.
Press the touch-operated area on a control knob for
5 seconds.
An acoustic signal sounds and the selected power level
appears on the control knob display.
The childproofing feature is now deactivated for this
cooking session and the desired power level can be
set.
The childproofing feature is activated again the next
time the cooktop is switched on.
INFO If the cooktop is switched off at the end of the
cooking session (turn the selector ring to the
12 o’clock position), the childproofing feature is
automatically re-activated.
Switching on the bridging function
Both control knobs are set to the 12 o’clock position.
Press the touch-operated area of both control knobs at
the same time for at least 1 second.
%
appears on the left control knob and
0
on the right
one.
Turn the selector ring on the right-hand control knob to
the desired power level within 3 seconds.
The power level (for both grilling zones) appears on the
right-hand control knob’s display.
The right-hand control knob can now be used to adjust
the power levels for both grilling zones.
If the right-hand selector ring is not turned to a power
level within 3 seconds of activating the bridging
function, this function is disabled and the cooktop
switched off.
Switching off the bridging function
Turn the right-hand control knob to the 12 o’clock
position.
The bridging function and cooktop are switched off.
6.3.4 Cleaning function
INFO The selector ring position for the cleaning function
is between the 12 o’clock and 1 o’clock positions
(see low power levels).
Turn the selector rings on both control knobs
approximately 15° clockwise from the 12 o’clock
position until they engage.
c
appears on the control knob displays.
The crescent-shaped grilling zone indicators flash while
the zones are heating up or cooling down.
Wait until the grilling zone indicators have stopped
flashing.
Once the optimum cleaning temperature of 70°C has
been reached, the grilling zone indicators stop flashing.
Clean the Tepan stainless steel grill as described in the
Cleaning and maintenance section.
INFO The cleaning function must be activated for both
grilling zones to prevent the risk of burns.
INFO Only start cleaning the grilling zones once the
optimum
cleaning temperature has been reached
(see also the Cleaning section).
Switching off cleaning function
Turn both control knobs to the 12 o’clock position.
The cleaning function and the cooktop are
switched off.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKT11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKT11 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKT11

Bora Pro PKT11 User Manual - German - 36 pages

Bora Pro PKT11 User Manual - Dutch - 36 pages

Bora Pro PKT11 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info