714356
21
Zoom out
Zoom in
Previous page
1/32
Next page
EN
21
Installation
www.bora.com
5.6 Configuration menu
Once installation is complete, you can adjust the basic
settings for the cooktop. These can then be changed at
any time.
5.6.1 Accessing the configuration menu
Turn the control knob to the 11 o’clock position.
The control knob display shows
t
.
Press the touch surface of the control knob for one
second. The display changes to
0
0
0
.
Press the touch surface again within 3 seconds and
hold for 5 seconds.
The control knob display shows
C
, a beep is heard and
the configuration menu is available.
5.6.2 Select menu option
Turn the knob ring to select the menu option you want.
The following menu options are available:
Menu options
C
0
Warning beep volume
C
1
Select operating mode (normal operation or demo mode)
C
2
0° or 180° installation
C
3
Control knob display type
C
9
Availability of the pause function
Tab. 5.5 Menu options in the conguration menu
Touch the touch surface on the control knob again for
1 second to confirm the menu you want.
The sub-menu is accessed and the display switches to
a three-character combination (e.g.
C
2
3
).
INFO In the three-character combination shown, the
right-hand figure shows the value saved in the
system.
Setting the volume of the warning beep
Once you have confirmed menu option
C
0
, you can set
the volume of the warning beep.
Setting Warning beep volume
C
0
0
100% (max. volume) Factory setting
C
0
1
10% (min. volume)
C
0
2
20%
C
0
3
30%
C
0
4
40%
C
0
5
50%
C
0
6
60%
C
0
7
70%
C
0
8
80%
C
0
9
90%
Tab. 5.6 Warning beep volume
Select operating mode
Once you have confirmed menu option
C
1
, you can select
the operating mode.
Setting Operating mode
C
1
0
Normal operation Factory setting
C
1
1
Demo mode
Tab. 5.7 Operating modes
INFO All the control knob functions are available in
demo mode. The heating function for the cooktop
is deactivated. Demo mode is used, for example,
for exhibitions.
0° or 180° installation
In menu option
C
2
, you can set whether the cooktop is
installed rotated by 180°.
Setting
Display
C
2
0
0° installation Factory setting
C
2
1
180° installation
Tab. 5.8 Installation direction
INFO For installation rotated by 180°, the setting
C
2
1
correctly assigns the correct cooking zones inside
the control knob display.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora Pro PKT11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora Pro PKT11 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora Pro PKT11

Bora Pro PKT11 User Manual - German - 36 pages

Bora Pro PKT11 User Manual - Dutch - 36 pages

Bora Pro PKT11 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info