714388
59
Zoom out
Zoom in
Previous page
1/64
Next page
EN
59
Troubleshooting
www.bora.com
Operating situation Cause Remedy
You notice the smell of gas. A leakage point in the gas supply line Switch off the gas supply and immediately
extinguish all open flames. Contact a gas
engineer. Ensure that all connections are
tight (see the Gas installation chapter).
No gas is coming out of the gas
burners.
The gas supply is closed Open the gas supply (see the Operation
chapter)
The gas bottle (in the case of liquid gas LPG) is
empty.
Exchange the empty gas bottle for a full gas
bottle of the correct gas type.
The gas flame goes out after ignition.
The gas flame goes out during
operation.
The gas flame is uneven.
The gas burner parts (burner heads and/or th
e
gas burner cover) are not correctly positioned.
Position the gas burner parts correctly (see
the Cleaning chapter).
Dirt in the gas outlet openings on the gas
burner head.
Clean the gas burner parts (see the Cleaning
chapter).
all error codes
E
... (except
E
0
6
6
)
Error when the software is running Wait 5 seconds, then tap the flashing error
indicator
E
(update error)
Disconnect the device from the mains for at
least 1 min. and restart it.
Contact the BORA Service Team.
Error code
E
0
6
6
Gas supply interrupted and/or no flame
detected. The gas bottle is empty.
Wait 5 seconds, then tap the flashing error
indicator
E
(update error)
Try to ignite it again (the gas pipe needs
a certain amount of time to fill after
installation).
Contact the BORA Service Team.
Tab. 10.1 Resolving a fault
After troubleshooting try again and check that the problem has been solved.
With all faults, try restarting the system.
As a last resort, briefly disconnect the power supply.
INFO During or after an interruption to the power supply, the cooktops may still be hot. In the case of cooktops
CKCH, CKCB and CKG, after an interruption to the power supply the residual heat is not displayed, even if they
were previously in operation and the cooking zones are still hot.
Should faults arise frequently, contact the BORA Service Team (see Warranty, service, spare parts and accessories
chapter) and specify the error number displayed and the appliance type (see Identification plates chapter).
E
= error = information
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKFI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKFI in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKFI

Bora CKFI User Manual - German - 64 pages

Bora CKFI User Manual - Dutch - 64 pages

Bora CKFI User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info