714388
58
Zoom out
Zoom in
Previous page
1/64
Next page
EN
58
Troubleshooting
www.bora.com
Operating situation Cause Remedy
Cooktops
The cooktop is displayed but both
cooking zone displays show an error
E
and an error code is shown in the multi-
function display
(e.g.
E
5
4
7
)
No power supply at the cooktop Have a specialist electrician inspect the
cooktop fuse and power connection
respectively
Faulty generator/electronics Contact the BORA Service Team
Cooktop not displayed Cooktop was not recognised Check the communication cable connection
Error codes
E
H
E
A
t
Overheating Remove hot objects from the immediately
vicinity of the operating panel
Switch off the system and leave it to cool
Clean the air vents on the bottom of the
appliance (only in the case of Tepan stainless
steel grill CKT)
Contact the BORA Service Team
The cooktops have no output although
a power level has been set and
d
E
n
0
is displayed
The demo mode is active Contact your BORA retailer or the BORA
Service Team
Faults on gas cooktop CKG
When operating for the first time or after a prolonged period without use or when the gas bottles have been changed:
Burner doesn’t ignite There is air in the gas pipe Repeat the ignition process, several times if
necessary (tap the required cooking zone and
set a power level).
Gas cooktop does not react
(servomotors do not calibrate and no
ignition)
There is a communication error between the
control unit and the cooktop (e.g. in the event
of a power cut).
Perform a reset (see Gas configuration menu)
The gas burner cannot be ignited
electrically.
The fuse or automatic circuit breaker of the
apartment and/or house’s electrical system is
defective or has been triggered.
Change the fuse. Switch the automatic circuit
breaker back on. If necessary, contact a
specialist electrician.
The fuse or the automatic circuit breaker trips
several times.
Contact the BORA Service Team.
The power supply is disconnected. Have a specialist electrician inspect the
power supply.
The gas burners are damp. Dry the gas burner parts (see the Cleaning
chapter).
The gas burner heads and/or the gas burner
cover are not correctly positioned.
Position the gas burner parts correctly (see
the Cleaning chapter).
The electric igniter and/or thermocouple are
dirty
Remove the dirt (see the Cleaning chapter)
Dirt in the gas burner head Clean the gas burner parts (see the Cleaning
chapter).
The cooktop does not ignite automatically. Try to ignite it again using the touch surface
on the control knob.
E
= error = information
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKFI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKFI in the language / languages: English as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKFI

Bora CKFI User Manual - German - 64 pages

Bora CKFI User Manual - Dutch - 64 pages

Bora CKFI User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info