714400
23
Zoom out
Zoom in
Previous page
1/32
Next page
EN
23
Installation
www.bora.com
6
5
3
2
1
4
9
UFH
35
120
20
Fig. 6.31 Stripping lengths and assembly position of the
connection cable in the control unit
[1] Stripped wire end
[2] Insulated wire
[3] Jacketed cable
[4] Strain relief clamp
[5] Cable feed snap-out element
[6] Universal ferrite sleeve (UFH)
Please adhere to the maximum stripping length of
9 mm on the stripped wire end [1].
Please adhere to the maximum stripping length of
26 mm on the insulated wire [2].
Installing the external switching device
Depending on the type of switching device, connect the
connection cables to either the Home In or the Home Out
connection clamp.
Adhere to the connection diagram when connecting
Home In and Home Out.
Home
In
Home
Out
X 7.1
X 7.2
X 6.1
X 6.2
Fig. 6.32 Connection diagram for the external switch contacts
Connect the cable for the relevant contact to the
switch contact clamp [4] in accordance with the
relevant connection diagram (see fig. Connection
diagram for the external switch contacts).
In order to connect the Home In interface, the installed
bridge must be removed.
INFO The Home In contact must be bridged if this is
not used (bridged on delivery).
Preparing connection cables for external
switching devices
Use connection cables of the following types and from
the following manufacturer to connect external switching
devices.
Contact Connection cable
Home In H03VV-F 2x0.5mm²
Home Out H03VVH2-F 2x0.75mm²
Tab. 6.5 Connection cable
INFO The connection cable is only designed for
indoor use in buildings, private households,
kitchens or offices!
INFO The overall length of the connection cable for
external switching devices must not exceed
10 m!
For reasons of electromagnetic compatibility, all
connection cables from external switching devices must
be filtered with a ferrite sleeve. This is not included in the
scope of delivery.
Use the order code UFH (universal filter sleeve) to
order the filter sleeve from your specialist supplier or
contact BORA via the website at www.bora.com.
Fig. 6.30 Wrap the connection cable around the ferrite sleeve
three times
Wrap the connection cable around the ferrite sleeve
three times to create the desired filter performance.
Ensure that the cable end protrudes at least 120 mm
from the sleeve.
Prepare the connection cable in accordance with the
prescribed stripping lengths.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKASE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKASE in the language / languages: English as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKASE

Bora CKASE User Manual - German - 32 pages

Bora CKASE User Manual - Dutch - 32 pages

Bora CKASE User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info