714400
20
Zoom out
Zoom in
Previous page
1/32
Next page
EN
20
Installation
www.bora.com
Push the substructure module [2] into the silence
module [3].
INFO Never place strain on the cooktop extractor
frame when installing the substructure module.
This will deform the cooktop extractor frame.
Connect the substructure module [2] to the cooktop
extractor frame [1] by carefully pressing the
substructure module [2] upwards into the relevant
cooktop extractor frame brackets [1]. The module
should audibly click into place on each of the long
sides of the extractor frame to indicate that it has been
correctly connected.
click
click
click
click
Fig. 6.23 Attaching the substructure module
Use the sealing tape (UDB) provided to adhere the
substructure module [2] to the silence module [3].
Place the control unit [8] in the plinth area.
INFO Position the plinth fan and the control unit in
such a way that they are easily accessible and
removable for maintenance work.
The maximum exhaust air duct length is 6 m.
The minimum cross-section of the air ducts must be
176 cm². This corresponds to a round pipe with a
diameter of 150 mm.
For the ducting, only use stable duct elements with
smooth pipe interiors. Do not use flexible or fabric
tubes.
The exhaust air must be directed outside or to the
recirculation unit through appropriate ducts.
For further planning examples and notices, please see
the ventilation handbook (not included in the scope of
delivery).
INFO When attaching the sealing tape, ensure that
an airtight seal with the connection duct piece
is created when the tape is compressed.
6.5.3 Installation – standard set-up
1
2
3
4
5
6
8
Fig. 6.22 Standard set-up
[1] Cooktop extractor
[2] Substructure module
[3] Silence module
[4] Transition piece (curved or straight)
[5] Universal plinth fan
[6] Air duct or recirculation unit
[7] Protective grid (not visible)
[8] Control unit
Position the plinth fan [5].
To facilitate positioning, the inlet nozzle on the plinth
fan can be removed. To do this, please see the
assembly instructions for the ULS universal plinth fan.
Push the transition piece [4] onto the inlet nozzle of
the plinth fan [5].
You can also use the sealing tape provided (UDB) to
adhere the connections together.
Push the silence module [3] onto the transition piece
[4].
Tape the transition piece [4] to the silence module [3].
INFO To secure the silence module, this must to
screwed to the transition piece to relieve the
strain on the substructure module.
Now screw together the silence module [3] and the
transition piece [4].
Insert the protective grid [7] into the upper opening on
the silence module [3].
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CKASE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CKASE in the language / languages: English as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CKASE

Bora CKASE User Manual - German - 32 pages

Bora CKASE User Manual - Dutch - 32 pages

Bora CKASE User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info