714397
20
Zoom out
Zoom in
Previous page
1/28
Next page
EN
20
Operation
www.bora.com
INFO The control light on the active cooking zones
shows that the automatic cut-off is activated.
The remaining time is displayed.
After the end of the time set, the cooking zone turns off
automatically.
Prerequisite
A cooking zone has been selected.
A power level was set.
Press the timer button .
The relevant cooking zone blinks and
00
appears in the
cooking zone display.
Press or to set the required time.
Press the timer button again to activate it.
Activation will take place within 10 seconds of the last
activation of the button.
Changing the timer settings
Press the timer button for the cooking zone for
which you want to change the time.
The relevant control light blinks.
Press or to set the required time.
Switching the timer off early
Press the time button for the cooking zone for
which you want to switch off the timer.
The relevant control light blinks.
Press until the timer display shows
00
,
or
press and at the same time. The time in the
timer display is immediately set to
00
.
6.1.11 Activating/deactivating the
childproofing feature
INFO If a cooking zone shows
L
then
H
alternately,
the cooking zone is still hot.
Activating the child safety lock
Prerequisites:
The cooktop is switched on.
All cooking zones are switched off.
Press the sensor buttons for the front and back
cooking zone at the same time. Then press the sensor
button for the front cooking zone again.
Both cooking zone indicators will display
L
. The child
safety lock is activated.
Deactivating the child safety lock for a
cooking session
INFO If a cooking zone indicator alternately shows
0
and
H
, the cooking zone is still hot.
6.1.9 Heat retention level
A cooking zone is in operation.
The power level
1
is activated.
Press to set the heat retention level
v
.
After 2 seconds, the cooking zone will automatically
switch off.
6.1.10 Using the timer function
You can use 2 timer functions:
Short-time timer (egg timer), no automatic switching
off of a cooking zone.
Automatic cut-off for automatically switching off a
cooking zone.
You can set a time range of between 1 and 99 minutes for
both timer functions.
If you press first, 1 minute will be pre-set as the
starting time.
If you press first, 30 minutes will be pre-set as the
starting time.
Switching off the timer signal tone
Press any sensor button on the operating panel to end
the signal tone prematurely.
Setting the short-time timer (egg timer)
You can set a short-time timer for each cooking zone.
INFO The control light on the active cooking zones
shows that the short-time timer is activated.
The remaining time is displayed.
After the end of the time set, 00 will be displayed for a
few seconds on the timer display. A signal tone will sound
for a few seconds.
Prerequisite
The cooktop must be switched on.
Press the timer button or .
Each control light will blink and
00
will appear in the
cooking zone display.
Press or to set the required time.
Activation will take place within 10 seconds of the last
activation of the button.
If the cooktop is switched off with the on/off button
, the cooking zone control light will become active
and the remaining time will be displayed.
Changing the timer settings
Press to switch on the cooktop.
The timer control light blinks.
Press or to set the required time.
Setting the automatic cut-off
You can set an automatic cut-off for every cooking zone.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora CCH1 Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora CCH1 Classic in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora CCH1 Classic

Bora CCH1 Classic User Manual - German - 28 pages

Bora CCH1 Classic User Manual - Dutch - 28 pages

Bora CCH1 Classic User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info