714526
35
Zoom out
Zoom in
Previous page
1/48
Next page
EN
35
Operation
www.bora.com
7.2.17 Setting the short-time timer (egg timer)
Press the timer button
00 will appear in the timer display for a few seconds
and the dot below the display will flash.
If there is no input, the timer display will turn off after
10 seconds.
Press the timer button multiple times to increase
the duration by +10 minutes each time.
Change the minutes in the timer display by making a
selection on the setting ring.
Once the desired time has been selected, the timer
starts automatically.
7.2.18 Switching off the short-time timer
(egg timer) early
You can switch off the short-time timer early by
changing the remaining timer setting to
00
.
7.2.19 Setting the automatic cut-off
You can set an automatic cut-off for every cooking zone.
INFO If several cooking zones are activated with an
automatic cut-off, the lowest timer value will be
shown and the timer control light for the cooking
zone in question will light up more brightly.
Prerequisite
A cooking zone has been selected.
A power level was set.
Select the desired cooking zone.
Press the timer button within 3 seconds.
00 will appear in the timer display for a few seconds
and the dot next to the display will flash.
Press the timer button multiple times to increase
the duration by 10 minutes each time.
Change the minutes in the timer display by making a
selection on the setting ring.
Once the desired time has been selected, the timer
starts automatically.
After the last input, the set time will be displayed in the
timer display for a few seconds.
7.2.20 Switching off the automatic cut-off
early
The activated automatic cut-off function will end early if you
change the remaining timer setting to
00
;
switch off the cooktop using the on/off switch .
Change the power level to 0.
7.2.21 Changing the timer settings
Press the cooking zone button for the cooking zone for
which you wish to change the automatic cut-off.
Press the timer button multiple times to increase
the duration by 10 minutes each time.
Change the minutes in the timer display by uniformly
swiping the setting ring.
After the end of the automatic heat up function
(see the Device Description chapter), the cooking
session will continue with the desired continuous
cooking level, e.g.
7
.
7.2.13 Switching off the automatic heat up
function
The activated automatic heat up function will end
prematurely if you
change the power level;
activate the power setting P;
activate the heat retention level
v
;
switch off the cooktop using the on/off switch .
7.2.14 Heat retention level
The cooktop is switched on.
Select a cooking zone.
Press the multi-function button several times to
increase the heat retention level.
The cooking zone indicator will display the relevant
heat retention level, e.g.
:
.
Press the multi-function button again.
The heat retention level is deactivated.
The cooking zone will automatically switch off after
8 seconds.
7.2.15 Using the timer function
INFO The relevant timer control light shows whether the
timer is activated. The timer control
light lights up until the cooking zone has
automatically switched off after the pre-set time
has passed.
Prerequisite
The cooktop is switched on.
You can use 2 timer functions:
Short-time timer (egg timer – cooking zone does not
switch off automatically).
Automatic cut-off (for automatically switching off a
cooking zone).
You can set a time range of between 1 and 99 minutes for
both timer functions.
INFO After the end of the time set, 00 will appear in
the time display for a few seconds and the dot in
the display or the relevant timer control light will
flash. A signal tone will sound for a few seconds.
The signal tone and the flashing are automatically
deactivated after 2 minutes.
7.2.16 Switching the signal beep off early
Press any sensor button on the operating panel to end
the signal tone prematurely.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BFIAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BFIAS in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BFIAS

Bora BFIAS User Manual - German - 52 pages

Bora BFIAS User Manual - Dutch - 52 pages

Bora BFIAS User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info