714526
33
Zoom out
Zoom in
Previous page
1/48
Next page
EN
33
Operation
www.bora.com
7 Operation
Observe all safety and warning information during
operation (see the Safety chapter).
INFO Only operate the cooktop if the stainless steel
grease filter and the air inlet nozzle have been
installed.
7.1 General operating instructions
The cooktop or cooktop extractor is operated using the
operating panel.
The selection of the cooking zone is performed by the
direct selection of the assigned sensor button on the
operating panel.
There are 9 power levels and one power setting available
for each cooking zone and the cooktop extractor.
The selection on the setting ring is performed by
direct selection or by uniformly swiping clockwise or
anti-clockwise.
0
3
1
6
9
P
Fig. 7.1 Setting ring with power level positions
7.2 Operating the cooktop
Switching on
INFO If the display shows
0
and no other input is made,
the device will switch off automatically after 20
seconds.
Press the on/off switch to switch on the device.
The power level
0
is shown on the display.
Switching off
INFO Use the operating panel to switch off the cooking
zone after use. Do not rely on the pan size
recognition.
Press the on/off switch to switch off the device.
Pay attention to the residual heat display
(see the Device Description chapter).
7.2.1 Select cooking zone
Press the cooking zone button for the desired cooking
zone.
The
0
in the cooking zone indicator lights up more
brightly.
7.2.2 Adjusting the power level
Press the desired power level or
Press and uniformly swipe round the setting ring until
the desired power level is reached.
7.2.3 Changing the power level
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select the desired power level.
7.2.4 Selecting the power setting
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select power setting
P
.
The power setting
P
is displayed in the cooking zone
indicator.
If one cooking zone is operated with the
P
power setting,
then the operation of the second cooking zone on this
side is possible at a maximum of power level
5
.
If power level
5
is increased, the
P
power setting is
switched off.
7.2.5 Switching the power setting off early
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Select another power level.
The current power level is displayed in the cooking
zone indicator and the power setting is deselected.
7.2.6 Switching off the cooking zone
Press the cooking zone button for the desired cooking
zone.
The cooking zone indicator lights up more brightly.
Press the power level position
0
.
0
will appear on the display for a few seconds, then the
display will turn off.
7.2.7 Pay attention to the residual heat
display
After switching it off, the cooking zone remains hot.
H
is
displayed in the cooking zone indicator (residual heat
display). The cooking zone indicator will go out after
sufficient cooling time (temperature < 60°C).
INFO While
H
is displayed in the cooking zone indicator
(residual heat display), do not touch the cooking
zone or place any heat-sensitive objects on top of
it. Risk of burns and fire!
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bora BFIAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bora BFIAS in the language / languages: English as an attachment in your email.

The manual is 5,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bora BFIAS

Bora BFIAS User Manual - German - 52 pages

Bora BFIAS User Manual - Dutch - 52 pages

Bora BFIAS User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info