814323
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
Transfer and attach the upper door hinge to the
opposite appliance side after unscrewing the
hinge pin and inserting it into the adjacent hole.
Screw in the screws (s) on the opposite side.
Replace the appliance cover and fix it.
Dismount the door handle and attach it to the cor-
responding other door outer side. Refer to the in-
structions in
"Assembling the door handle"
. Trans-
fer the cover caps on the exposed holes to the re-
spective other door outer side.
Check that the door is optimally aligned both verti-
cally and horizontally to ensure smooth opening and
closing of the door.
Startup / Operation
Intended use
The appliance is intended for private/household use.
It is suitable for cooling perishable foods such as
milk, dairy products, meat, fish, eggs, margarine, var-
ious spreads and fruit and vegetables that are not
sensitive to cold.
This cooling unit is not suitable for freezing food!
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
“Cleaning and maintenance”
.
Starting the appliance
Connect the appliance to the power supply.
Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels control the different values of the
internal temperature.
Power level
1, 2
lowest level,
warmest internal temperature
3, 4
medium level,
optimal operating temperature
5, 6, 7*
highest level,
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
Basically, the temperature changes depending on
the ambient temperature (place of installation), the
frequency of opening the door and the equipment.
For initial operation, first set the lowest possible inter-
nal temperature (= highest power level) until the ap-
pliance has reached the desired operating tempera-
ture. It is recommended to reset to a medium power
level afterwards, then you can easily make any tem-
perature correction.
Recommendation, for optimized food storage and
to avoid food waste, a medium power level is gener-
ally best. A high power level also increases energy
consumption.
The recommended temperature in the center of the
appliance is approx. 4∼7 degrees. If the temperature
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann VS 2195.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann VS 2195.1 in the language / languages: English, German as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info