497223
18
Zoom out
Zoom in
Previous page
1/26
Next page
18
ENGLISH
ENGLISH
Symbols on the control panel
Symbol
Meaning/
function
Symbol
Meaning/
function
Microwave
Child-proof lock
activated
Defrosting Auto function
Grill Weight in grams
Microwave
+ grill
Programmed
Start
Power
high/low
Avoiding Fire Hazards with Built-in Appliances
Always observe the instructions contained in the section “Instal-
lation Instructions”.
Do not remove the feet on the underside of the device.
Use only the mounting materials supplied for the installation.
When installing the microwave oven, please adhere to the
dimensions shown in drawings 1 and 2.
The rear wall of the cupboard has to be removed!
There is a ventilation slot at the bottom edge of the mounting
frame. Keep the ventilation slots free at all times.
Installation Accessories
Item Designation Number
A
Adjustment screw 1
B Mounting frame 1
C
Screw 1
D
Dummy plug 1
Installation Instructions
This microwave oven must be installed in a tall or wall cupboard.
Please note the following instructions:
Remove everything that is fragile from the adjacent cup-
boards.
For installation the cabinet must meet the following condi-
tions:
The cupboard must not contain any cracks, splinters or
other damage. All connections must be stable.
The cupboard must be designed for a minimum load of
40 kg.
The microwave oven must be installed at a height of at
least 85 cm.
The rear wall of the cupboard has to be removed so that
the microwave oven is ventilated!
The thickness of the cupboard wall must be at least
19 mm.
Wall cupboards must be anchored fi rmly in the wall with
at least 2 screws. Check the stability by attaching an
appropriate weight.
In the case of wall cupboards the installation depth of
the cupboard has to be at least 320 mm.
CAUTION:
Do not install the device above a cooker!
When installing the device it must be ensured that there is a
power socket within reach.
The mains socket must be within easy reach, so that the
plug can be quickly removed in an emergency.
Important! Do not connect the device to the mains power
supply until after installation!
WARNING:
Please adhere to the dimensions stated in the installation
instructions.
The installation accessories supplied should be used.
If screws are inserted too deeply (screws too long) this
may damage the device or represent a hazard to the user
or others.
Dimensions of the Built-in Cupboard
Make a built-in cupboard or a niche in accordance with the
following dimensional drawings. Figure 1 is for wall cupboards,
gure 2 for tall cupboards.
Installation (Figures 3 to 6)
Screw the adjustment screw (A) completely into the upper
air duct (E).
Put the microwave in the built-in cupboard.
Now unscrew the adjustment screw until it is about 1 mm
below the top of the cupboard.
ޥ NOTE:
This prevents the microwave oven from tilting over in the
cupboard.
05_EMWG 2215 CB.indd 1805_EMWG 2215 CB.indd 18 23.03.2010 14:04:33 Uhr23.03.2010 14:04:33 Uhr
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann MWG 2215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann MWG 2215 in the language / languages: English, German as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info