814353
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
Loosen the screws (1) on the appliance back. Re-
move the cover caps (2), loosen the screws un-
derneath and remove the appliance cover.
Dismount the upper door hinge (3) and lift the ap-
pliance door.
Dismount the door stopper (4) on the underside of
the door and attach the enclosed door stopper on
the opposite side. Set the appliance door safely
aside.
Tilt the appliance slightly backwards and block it
in this position. Unscrew the feet (5) and (6). Dis-
assemble the lower door hinge (7).
Transfer and attach the lower door hinge (7) to
the opposite appliance side. Screw in the feet (6)
and (5) accordingly.
Put the appliance back in the upright position.
Put on the appliance door and fix it in the intended
position.
Transfer and attach the upper door hinge (3) to
the opposite appliance side.
Fasten the appliance cover and replace the cover
caps (2).
Check that the door is optimally aligned both verti-
cally and horizontally to ensure a smooth opening
and closing of the door.
Startup / Operation
Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter
Cleaning and Maintenance”
.
Starting the appliance
Connect the appliance to the power supply.
Set the operating conditions. See also the follow-
ing sections.
Settings
The power levels control the different values of the
internal temperature.
Power level
MIN
lowest level, warmest internal tem-
perature
approx. +10°C ∼ +14°C
NORMAL
medium level, optimal operating tem-
perature
approx. +6°C +10°C
MAX*
highest level, coldest internal temper-
ature
approx. +2°C ∼ +6°C
*Beware of high setting because the maximum level may
already mean "freezing point".
Basically, the temperature changes depending on the
ambient temperature (place of installation), the fre-
quency of opening the door and the equipment.
For initial operation, first set the lowest possible inter-
nal temperature (= highest power level) until the ap-
pliance has reached the desired operating tempera-
ture. It is recommended to reset to a medium power
level afterwards, then you can easily make any tem-
perature correction.
Recommendation, for optimized storage a medium
power level is generally best. A high power level also
increases energy consumption.
Interior light
The light is switched on or off via the on/off switch.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 7280.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 7280.1 in the language / languages: English, German as an attachment in your email.

The manual is 0.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info