814353
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
Coolant
WARNING: Risk of fire / flammable
materials
The coolant circuit of this unit contains the refrigerant
Isobutane (R600a), a natural gas that is flammable
and of high environmental compatibility. Make sure
no parts of the coolant circuit get damaged during
transport and installation of the appliance.
If the coolant circuit is damaged:
avoid any open flames or ignition source,
disconnect the plug,
thoroughly air the room in which the appliance is
installed and
contact an authorized technician.
Transport and Packaging
Transport the appliance
Transport the appliance, if possible, in vertical posi-
tion. Otherwise, it is absolutely necessary to allow
the appliance standing upright for a few hours before
installation
”Prior to first use”
. Protect the appliance
during transport against weather influences.
NOTE:
The appliance has wheels, which make it easier for
you to transport or install the appliance. Tilt the appli-
ance slightly backwards and move it carefully.
Unpacking the appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
and cardboard packaging.
Dispose of packaging materials that are no longer
required in accordance with the locally applicable
regulations.
To prevent hazards, check the appliance for any
transport damage.
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter
“Cleaning and Maintenance”
.
Appliance Equipment
Appliance overview
1 Temperature control, interior light + light switch
2 Grid shelves
(max. loading 35 kg/shelf)
3 Feet
Delivery scope
5x grid shelf, 1x door stopper
(for reversing the door
opening)
Installation
Conditions for the installation location
Good ventilation is required around the appliance
to dissipate the heat properly and to guarantee ef-
ficient cooling operation at low power consump-
tion. Enough clearance is necessary.
- Gap to the back approx. 5070 mm, to the
side walls and above the appliance each ap-
prox. min. 100 mm;
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann KSG 7280.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann KSG 7280.1 in the language / languages: English, German as an attachment in your email.

The manual is 0.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info