814370

Bomann GSPE 7413 TI Manual

30
Zoom out
Zoom in
Previous page
1/48
Next page
30
Dimension and preparation of the decoration panel
Prepare the wooden decorative panel according to
the dimensional drawing below.
CAUTION:
Before drilling, check the furniture front for sufficient
thickness.
Unit mm
• Align the enclosed drilling template and mark the
necessary drill holes. Check them with a spirit
level.
• Drill holes of Ø 2 mm and approx. 8 mm depth at
the pre-marked positions in the panel.
Fixing the decoration panel
• Separate the supplied Velcro strips (A) and (B)
from each other.
• Stick the Velcro strip (A) on the wooden panel
(top and bottom) and the felt strip (B) to the appli-
ance door at the appropriate height.
• Align the panel and the appliance front with each
other and fix the panel to the appliance door.
• To do this, first remove the short screws (4xS1)
mounted at the factory from the inside of the door.
• Screw in the supplied long screws (4xS2).
Using the spacer bar
With this accessory, you can compensate the gap
between the control panel and decoration panel.
The spacer bar consists of several layers, that are
connected with a click mechanism.
Adjust the height of the top spacer to the gap. To do
this, remove the appropriate number of layers.
Adjusting of the door spring tension
After fixing the decoration panel, the door spring
tension must be adjusted accordingly.
• Turn the set screws clockwise or counterclock-
wise as required. The steel cable tightens or loos-
ens.
• Check the door spring tension. If the appliance
door remains horizontal when fully open, but close
easily, the tension is set correctly. Otherwise,
make the adjustment again.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSPE 7413 TI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSPE 7413 TI in the language / languages: English, German as an attachment in your email.

The manual is 2.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info