Manual Bomann GSP 5703 (page 15 of 20) (English)

552047

Zoom out

Zoom in

1/20

12/2011

By unscrewing the coarse filter, you can remove the filter system.

NOTE: When following this procedure from step1 to step 2, the filter system will be removed;

when following it from Step 2 to Step 1, the filter system will be installed.

- Inspect the filters for blocking after every time the dishwasher has been used.

- By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and

clean the filters under running water.

REMARK: The entire filter assembly should be cleaned once a week.

Cleaning the Filter

To clean the coarse filter and the fine filter, use a c leaning brush. Reassemble the filter parts as

shown in the figures on the last page and reinsert the entire assembly in the dishwasher, positioning it

in its seat and pressing downwards.

WARNING: When cleaning the filters, don't knock on them. Otherwise, the filters could be con-

torted and the performance of the dishwasher could be decreased.

Caring for the Dishwasher

The control panel can be cleaned by using a lightly dampened cloth.

After cleaning, make sure to dry it thoroughly. For the exterior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Cleaning the Door

To clean the edge around the door, you should use only a soft warm, damp cloth.

To avoid penetration o f water into the door lock and electrical components, do not use a spray cleaner

of any kind.

WARNING:

- Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical

components.

- Abrasive agents or some paper towels should not be used because of the risk of scratching or

leaving spots on the stainless steel surface.

Protect against Freezing

Pls. take frost protection measures on the dishwasher in winter. Every time after washing cycles, pls.

operate as follows:

1. Cut off the electrical power to the dishwasher.

2. .Turn off the water supply and disconnect the water inlet pipe from the water valve.

3. Drain the water from the inlet pipe and water valve (use a pan to catch the water).

4. Reconnect the water inlet pipe to the water valve.

5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

NOTE: If your dishwasher cannot work because of the ice, please contact professional service

persons.

Cleaning the Spray Arms

It is necessary to clean the spray arms regularly for hard water chemicals will

clog the spray arm jets and bearings.

To remove the upper spray arm, screw off the nut clockwise then remove the

arm.

To remove the lower spray arm, pull out the spray arm upward. Wash the arms

in soapy and warm water and use a soft brush to clean the jets. Replace them

after rinsing them thoroughly.

Step 1: Turn the coarse filter anti-

clockwise and lift it up.

Step 2: Lift the flat filter up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSP 5703 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSP 5703

Bomann GSP 5703 User Manual - German - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann GSP 5703 Manual

Product: